Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-10
The AirTAC Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-10 is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø100mm bore and 60mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-10
The ACEJ100X60-10 is a double acting ISO 21287 compact cylinder with a 100 mm bore and a 60 mm stroke that an external stop screw trims by up to 10 mm, giving a usable extend range of 50-60 mm. At 0.5 MPa it pushes with 3927 N and pulls with 3769.9 N, rising to 5497.8 N at 0.7 MPa, with a theoretical peak of 800.9 kgf at 1.0 MPa. The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so a 100 mm bore fits into press fixtures and gantries that cannot house a full-length body.
Plan real work at roughly 2356 N (about 0.6 of the 3927 N push) at 0.5 MPa, and note the rod can lift about 400 kg vertically at full 0.5 MPa push, or about 200 kg with a 2:1 margin. The hard-anodized aluminium body carries an S45C hard-chrome plated rod, fixed TPU bumpers absorb end-of-stroke energy, and the female M12x1.75 rod thread with a 1/8" PT port keeps plumbing simple. FA flange and LB foot brackets bolt straight to the ISO 21287 face.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-10 Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-10 |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-10
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 100 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-10 Is Used
Short-stroke press fixture
A 60 mm stroke trimmed to 50 mm on a bench press jig, where the 3927 N push at 0.5 MPa swages or stakes small aluminium housings without needing a full-length press body.
Pallet clamp on a machining line
Clamping cast-iron pump bodies on a CNC fixture, using the 50-60 mm adjustable window to match fixture height and the 2356 N practical working force to hold the part through cutting.
Gantry-mounted ejector
Ejecting filled cartons from a packaging gantry where the compact body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and the 1/8" PT port ties into existing 1/8" air drops.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-10 the Right Cylinder?
Size between neighbours: a 63 mm bore gives 1558.6 N push at 0.5 MPa, while this 100 mm bore delivers 3927 N, and the next step up, 125 mm, reaches 6135.9 N. If your tooling needs under 2400 N of working force at 0.5 MPa, the 100 mm bore leaves a healthy reserve. Remember the stop screw is a mechanical end stop for the extend stroke, not a mid-stroke lock, so the piston still drifts if air is lost. Order the -S variant if you later want CMSE / DMSE switches; this model has no magnet fitted. FA flange or LB foot mounting suits fixed press and clamp fixtures.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-10 FAQ
At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa push rises to 5497.8 N (pull 5277.9 N), and the theoretical maximum is 800.9 kgf at 1.0 MPa. The -10 code sets a 10 mm adjustment window: an external stop screw shortens the 60 mm extend stroke on site, so the usable range is 50-60 mm. It runs double acting on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s, with a female M12x1.75 rod thread and a 1/8" PT port.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why a 100 mm bore fits tight gantries and guards. Fixed TPU bumpers at both ends absorb end-of-stroke impact. FA flange and LB foot brackets bolt to the standard ISO 21287 face. Position sensing needs the optional -S magnet code, which allows CMSE / DMSE switches; this model, ordered without -S, carries no magnet, so no sensor can be mounted on it.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.