Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-30
The AirTAC Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-30 is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø100mm bore and 60mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-30
The ACEJ100X60-30 is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 60 mm stroke by up to 30 mm on site, giving a usable range of 30-60 mm without changing the cylinder. At the 100 mm bore it delivers 3927 N push and 3769.9 N pull at 0.5 MPa, rising to 5497.8 N push at 0.7 MPa, with a theoretical maximum of 800.9 kgf at 1.0 MPa. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so heavy clamping fits into tight press fixtures and gantries.
In practice, plan for roughly 2356 N (about 240 kg) of real work at 0.5 MPa instead of the full rating, which corresponds to lifting about 200 kg vertically with a 2:1 margin. The hard-anodized aluminium body carries a S45C hard-chrome plated 20 mm rod, a fixed TPU bumper absorbs end-of-stroke energy at both ends, and the optional -S magnet enables CMSE / DMSE switches when ordered.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-30 Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-30 |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-30
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 100 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-30 Is Used
Press-fit clamping of gearbox housings
The 3927 N push at 0.5 MPa seats aluminium housings into assembly fixtures, and the 30 mm window lets one cylinder serve several housing heights.
Pallet gate actuation on packaging lines
With about 200 kg of vertical lift capability at a 2:1 margin, the 100 mm bore swings heavy gates and stops in tight machine frames.
Die locating on small stamping benches
The short ISO 21287 body halves the mounting length of an ISO 15552 profile cylinder, locating dies where a full-length body cannot reach.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-30 the Right Cylinder?
At this force class the 100 mm bore pushes 3927 N at 0.5 MPa; step down to a 63 mm bore (1558.6 N) for lighter clamps or up to a 125 mm bore (6135.9 N) when the load grows. The stop screw is a mechanical end stop for the extend stroke, not a mid-stroke lock, so the piston still drifts if air is lost. FA flange or LB foot mounting bolts to the ISO 21287 face, and add the -S code if CMSE / DMSE position switches are needed.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-30 FAQ
At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa push rises to 5497.8 N, with a theoretical maximum of 800.9 kgf at 1.0 MPa. The -30 code is a 30 mm adjustment window: an external stop screw shortens the 60 mm extend stroke by up to 30 mm, so the usable range is 30-60 mm. It runs on air at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s, with a 1/8" port and a female M12x1.75 rod thread.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with FA flange and LB foot options on the standard face. A fixed TPU bumper at each end absorbs end-of-stroke energy. Switches are not possible on this unit as ordered because no magnet is fitted; the optional -S magnet code enables CMSE / DMSE switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.