Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-40S
The AirTAC Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-40S is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø100mm bore and 60mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-40S
The ACEJ100X60-40S is a double acting, adjustable-stroke compact cylinder built to ISO 21287. Its 100 mm bore delivers 3927 N push and 3769.9 N pull at 0.5 MPa, rising to 5497.8 N push at 0.7 MPa, with a theoretical peak of 800.9 kgf at 1.0 MPa. An external stop screw trims the 60 mm extend stroke anywhere inside the ordered 40 mm window, giving a usable range of 20-60 mm without changing the air supply. The hard-anodized aluminium body and S45C hard-chrome plated rod suit 0.15-1.0 MPa (22-145 psi) air filtered to 40 um, running 30-500 mm/s.
Because the short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, this 100 mm bore fits heavy presses and clamping fixtures where a full-length profile cylinder cannot. Plan on roughly 2356 N (about 240 kg) of real work at 0.5 MPa rather than the full rating, which means it lifts about 120 kg vertically with a 2:1 margin. The -S magnet is fitted on this model, so CMSE / DMSE reed or solid-state switches can be mounted in the body slots, and fixed TPU bumpers absorb end-of-stroke energy at both ends.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-40S Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-40S |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-40S
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 100 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-40S Is Used
Heavy press-fit station
The 3927 N push at 0.5 MPa presses bearings into housings on an automotive assembly line, with the 40 mm window letting technicians trim the 60 mm stroke down to 20 mm for shallow press depths.
Injection mould clamp
A 100 mm bore clamps mould halves on a plastics machine; the short ISO 21287 body slots into the tight platen space where an ISO 15552 profile cylinder would be twice as long.
Pallet lift-and-push unit
Lifts about 120 kg vertically with a 2:1 margin at 0.5 MPa, pushing pallets onto a conveyor, while the fitted -S magnet and CMSE switches confirm full extension at each cycle.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-40S the Right Cylinder?
At 3927 N push at 0.5 MPa this 100 mm bore sits near the top of the ACEJ range; step down to the 80 mm bore (2513.3 N push) for lighter clamping, or to the 125 mm bore (6135.9 N push) when the load demands more. Remember the stop screw is a mechanical end stop for the extend stroke, not a mid-stroke lock, so the piston still drifts if air is lost. FA flange or LB foot mounts bolt to the ISO 21287 face, and the fitted -S magnet accepts CMSE / DMSE switches for end-of-stroke detection.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-40S FAQ
At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa it pushes 5497.8 N and pulls 5277.9 N, with a theoretical maximum of 800.9 kgf at 1.0 MPa. The -40 code sets a 40 mm adjustment window: an external stop screw shortens the 60 mm extend stroke by up to 40 mm, so the working range is 20-60 mm. It is double acting with a 1/8" PT port and a 20 mm rod with an M12x1.75 female thread.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight jigs and gantries. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches mount directly in the body slots. FA flange and LB foot mounts bolt to the standard face, and fixed TPU bumpers at both ends absorb end-of-stroke energy; they do not hold or brake a load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.