Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-50S
The AirTAC Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-50S is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø100mm bore and 60mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-50S
The ACEJ100X60-50S is a double acting ISO 21287 compact cylinder with an adjustable extend stroke. Its 100 mm bore delivers 3927 N push and 3769.9 N pull at 0.5 MPa, rising to 5497.8 N at 0.7 MPa, with a theoretical peak of 800.9 kgf at 1.0 MPa. The -50 code means an external stop screw trims the 60 mm extend stroke anywhere in a 50 mm window, giving a usable range of 10-60 mm without changing the cylinder.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this heavy-thrust cylinder still fits presses, clamping fixtures and gantries where a full-length body would not. As a rule of thumb, plan on roughly 2356 N (about 240 kgf) of usable work at 0.5 MPa, and expect it to lift about 200 kg vertically with a 2:1 margin. The -S magnet is fitted, so CMSE / DMSE switches can be added for end-position sensing.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-50S Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-50S |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-50S
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 100 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-50S Is Used
Press-fit and staking stations
With 3927 N push at 0.5 MPa and a stroke trimmed down to 10 mm by the stop screw, it suits short-throw press-fitting of bearings and bushings where the body must sit inside a tight press frame.
Pallet clamp actuation on conveyors
The 60 mm stroke with a 50 mm adjustment window lets line engineers fine-tune clamp travel for different pallet sizes, while the compact body saves about 50% of the mounting length of an ISO 15552 profile cylinder.
Lift-and-lower ejector in packaging machinery
Able to lift about 200 kg vertically with a 2:1 margin, it raises carton stacks or chutes; the fitted -S magnet with CMSE / DMSE switches confirms up and down positions for the PLC.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-50S the Right Cylinder?
At 100 mm bore this is the second-largest ACEJ size: 3927 N push at 0.5 MPa versus 2513.3 N for bore 80, while the 125 mm bore reaches 6135.9 N if you need more. Remember the stop screw is a mechanical end stop only - on air loss the piston still drifts, so add a valve or lock for load holding. FA flange and LB foot mountings bolt to the ISO 21287 face, and the fitted -S magnet accepts CMSE / DMSE switches. Speed range is 30-500 mm/s over 0.15-1.0 MPa (22-145 psi).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-50S FAQ
At 0.5 MPa it pushes with 3927 N and pulls with 3769.9 N. At 0.7 MPa those rise to 5497.8 N push and 5277.9 N pull, and the theoretical maximum is 800.9 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, air filtered to 40 um, and speed 30-500 mm/s.
An external stop screw shortens the 60 mm extend stroke by up to 50 mm, so the working range is 10-60 mm; fixed TPU bumpers at both ends absorb end-of-stroke energy. The -S magnet is fitted on this model, so CMSE or DMSE reed and solid-state switches mount in the body slots. The hard-anodized aluminium body and S45C hard-chrome rod take FA flange or LB foot mounts on the standard ISO 21287 face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.