Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X75-10S
The AirTAC Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X75-10S is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø100mm bore and 75mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X75-10S
A double acting ISO 21287 compact cylinder, the ACEJ100X75-10S pairs a 100 mm bore with a 75 mm stroke that an external stop screw trims on site within the ordered -10 window, giving a usable extend range of 65-75 mm. At 0.5 MPa it pushes 3927 N and pulls 3769.9 N, and the hard-anodized aluminium body with an S45C hard-chrome plated 20 mm rod stands up to continuous jig and fixture duty.
The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into presses and gantries where a full-length body will not fit. Plan on roughly 2356 N (about 240 kgf) of real work at 0.5 MPa rather than the full rating, which means it lifts about 200 kg vertically with a 2:1 margin. The -S magnet this model carries lets CMSE / DMSE reed or solid-state switches report end positions, and a fixed TPU bumper at each end absorbs end-of-stroke shock.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X75-10S Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X75-10S |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 75 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X75-10S
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 100 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X75-10S Is Used
Short-stroke press station
A 75 mm stroke trimmed to 65 mm lets a bench-top stamping fixture bottom out at a repeatable depth, with 3927 N of push force at 0.5 MPa crimping terminals or staking inserts in one hit.
Pallet lift-and-lower module
With about 200 kg of vertical lift capacity at a 2:1 margin, the 100 mm bore raises palletized trays in a packaging cell, while the fitted magnet and CMSE switches confirm up and down positions to the PLC.
Clamping fixture on a CNC fixture plate
The compact body, about 50% shorter than an ISO 15552 profile cylinder, clamps automotive brackets inside a crowded machining fixture where LB foot mounting bolts straight onto the ISO 21287 face.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X75-10S the Right Cylinder?
At this bore size the step down is the 80 mm ACEJ (2513.3 N push at 0.5 MPa) and the step up is the 125 mm bore (6135.9 N), so pick the 100 mm when your load sits between roughly 1500 N and 3900 N. Remember the stop screw only shortens the extend stroke and is not a mid-stroke lock: on air loss the piston still drifts, so add a separate holding valve for suspended loads. FA flange or LB foot mounting bolts to the ISO 21287 face, and the fitted -S magnet enables CMSE / DMSE switch sensing. Operating window is 0.15-1.0 MPa (22-145 psi) at 30-500 mm/s.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X75-10S FAQ
At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa push rises to 5497.8 N (pull 5277.9 N), with a theoretical maximum of 800.9 kgf at 1.0 MPa. The -10 code is a 10 mm adjustment window: an external stop screw shortens the 75 mm extend stroke by up to 10 mm, so the usable range is 65-75 mm. It never lengthens the stroke past 75 mm, and the stop is a mechanical end stop, not a mid-stroke lock.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, S45C hard-chrome plated 20 mm rod and fixed TPU bumpers at both ends, running 0.15-1.0 MPa (22-145 psi) at 30-500 mm/s with 1/8" PT ports. The body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and FA flange or LB foot mounts bolt to the standard face. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be clipped onto the body slots for position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X75-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.