Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X80-10S
The AirTAC Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X80-10S is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø100mm bore and 80mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke80 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X80-10S
A double acting ISO 21287 compact cylinder, the ACEJ100X80-10S pairs a 100 mm bore with an 80 mm stroke that an external stop screw trims by up to 10 mm, giving a usable extend range of 70-80 mm. At 0.5 MPa it pushes 3927 N and pulls 3769.9 N, and at 0.7 MPa push rises to 5497.8 N. The hard-anodized aluminium body with an S45C hard-chrome rod runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so heavy clamping fits inside guards and gantry frames that a full-length body cannot enter. As a rule of thumb, plan for about 2356 N of real work at 0.5 MPa, which lifts roughly 240 kg vertically with a 2:1 margin. The -S magnet this model carries lets CMSE / DMSE switches report end positions, and a fixed TPU bumper absorbs end-of-stroke energy at both ends.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X80-10S Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X80-10S |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 80 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X80-10S
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 100 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X80-10S Is Used
Press-fit stamping stations
The 3927 N push at 0.5 MPa seats bearings or bushings into aluminium housings, while the 70-80 mm adjustable window matches varying part heights without re-plumbing.
Pallet lift-and-lower modules
With about 240 kg of vertical lift capacity at a 2:1 margin, the bore handles loaded tote pallets on assembly lines; the short body fits under low conveyor frames.
Gantry clamp with position feedback
The fitted -S magnet drives CMSE / DMSE switches to confirm full clamp on automotive fixture gantries, where the compact body clears guard walls.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X80-10S the Right Cylinder?
At this force class the 100 mm bore is near the top of the range: a 80 mm bore delivers 2513.3 N push at 0.5 MPa, while the 125 mm bore reaches 6135.9 N if you need more. Choose the 100 when a 2500 N-class bore is marginal but 125 mm is oversized. Remember the stop screw only shortens the extend stroke and is not a mid-stroke lock; on air loss the piston still drifts, so add external stops or a valve solution for holding. FA flange or LB foot mountings bolt to the ISO 21287 face, and the fitted -S magnet works with CMSE / DMSE switches. Port is 1/8" PT and the rod end is female M12x1.75.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X80-10S FAQ
At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa push is 5497.8 N; theoretical maximum is 800.9 kgf at 1.0 MPa. The -10 code is a 10 mm adjustment window: an external stop screw shortens the 80 mm extend stroke on site, so the usable range is 70-80 mm. It is a mechanical end stop only, not a load-holding brake.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with FA flange and LB foot options on the standard face. The port is 1/8" PT, the rod end is female M12x1.75, and a fixed TPU bumper sits at both ends. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be mounted for end-position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X80-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.