Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X90-40
The AirTAC Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X90-40 is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø100mm bore and 90mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke90 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X90-40
A double acting AirTAC compact cylinder to ISO 21287, the ACEJ100X90-40 pairs a 100 mm bore with a 90 mm stroke that an external stop screw can trim by up to 40 mm on site, giving a usable extend range of 50-90 mm. At 0.5 MPa it pushes 3927 N and pulls 3769.9 N, rising to 5497.8 N at 0.7 MPa, so it carries the heavy end of the ACEJ range. The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters when a press fixture or weld gantry leaves no room for a full-length body.
In practice that 3927 N push means you can plan on roughly 2356 N of real work at 0.5 MPa, and the same force lifts about 400 kg vertically, or about 200 kg with a 2:1 margin. The hard-anodized aluminium body carries a S45C hard-chrome plated 20 mm rod, a fixed TPU bumper sits at each end, and the optional -S magnet lets CMSE / DMSE switches report position; without -S no magnet is fitted. FA flange and LB foot mountings bolt straight to the ISO 21287 face.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X90-40 Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X90-40 |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 90 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X90-40
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 100 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X90-40 Is Used
Press and staking fixtures
With 3927 N push at 0.5 MPa the 100 mm bore stakes, rivets and presses bushings into housings, and the 50-90 mm adjustable range lets one cylinder serve several die heights.
Pallet lift-and-lower stations
The push force lifts about 200 kg vertically with a 2:1 margin, enough for loaded SBS pallets on an assembly line, with the TPU bumper softening each landing.
Weld gantry clamping beams
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots between robot fencing and fixture rails where a long-body cylinder will not fit.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X90-40 the Right Cylinder?
At this bore size the step either way is large: a 63 mm bore gives 1558.6 N push at 0.5 MPa, while a 125 mm bore reaches 6135.9 N, so the 100 mm suits loads in the several-hundred-kilogram class. Remember the stop screw is a mechanical end stop for the extend stroke, not a mid-stroke lock, so the rod still drifts if air is lost. Order the -S code if you need CMSE / DMSE sensing, and match FA flange or LB foot hardware to your fixture; ports are 1/8" on this bore.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X90-40 FAQ
At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa push is 5497.8 N and pull 5277.9 N, with a theoretical maximum of 800.9 kgf at 1.0 MPa. The -40 code is a 40 mm adjustment window: an external stop screw shortens the 90 mm extend stroke by up to 40 mm, so the usable range is 50-90 mm. It runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, with a fixed TPU bumper at both ends.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, a 20 mm S45C hard-chrome plated rod and a female M12x1.75 rod thread; the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder. FA flange and LB foot mountings fit the standard ISO 21287 face. Position sensing needs the optional -S magnet ordered with the cylinder, which then accepts CMSE / DMSE switches; this model has no S code, so no magnet is fitted. Port size is 1/8".
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X90-40
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.