Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X90-75S
The AirTAC Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X90-75S is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø100mm bore and 90mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke90 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X90-75S
The ACEJ100X90-75S is a double acting ISO 21287 compact cylinder with a 100 mm bore and a 90 mm stroke that an external stop screw trims anywhere in a 75 mm window, giving a usable extend range of 15-90 mm. At 0.5 MPa it pushes 3927 N and pulls 3769.9 N, rising to 5497.8 N on push at 0.7 MPa, with a theoretical peak of 800.9 kgf at 1.0 MPa. In practice, plan on roughly 2356 N of real work at 0.5 MPa, which is about a 240 kg vertical lift with a 2:1 margin.
The hard-anodized aluminium body with an S45C hard-chrome rod saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this heavy-thrust actuator still fits tight press fixtures and gantries. The -S magnet is fitted on this model, so CMSE or DMSE reed and solid-state switches can be clamped into the body slots for end-of-travel signals, and FA flange or LB foot mounts bolt straight to the ISO 21287 face.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X90-75S Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X90-75S |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 90 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X90-75S
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 100 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X90-75S Is Used
Pneumatic press fixture
Short-body 3927 N push at 0.5 MPa clinches, stakes or swages aluminium brackets in a compact press frame where a full-length profile cylinder will not fit.
Palletizing lift-assist head
With about 240 kg of vertical lift capacity at a 2:1 margin, the 100 mm bore raises and lowers carton stacks on a packaging line end-of-arm tool.
CNC fixture clamping
The 15-90 mm adjustable extend range lets one cylinder serve multiple part heights on a machining fixture, with CMSE switches confirming clamp state.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X90-75S the Right Cylinder?
At this bore size the step either way is large: a 63 mm bore delivers 1558.6 N push at 0.5 MPa, while the 125 mm bore reaches 6135.9 N, so pick the 100 mm when your load sits between roughly 1600 N and 4000 N. Remember the stop screw only shortens the extend stroke and is a mechanical end stop, not a mid-stroke lock - on air loss the rod still drifts, so add a separate holding valve if the load must stay put. Order FA or LB mounting and the PT port thread to suit your manifold; the 1/8" port feeds the high flow this bore needs at 30-500 mm/s.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X90-75S FAQ
At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa push is 5497.8 N and pull 5277.9 N, with a theoretical maximum of 800.9 kgf at 1.0 MPa. The -75 code sets a 75 mm adjustment window: an external stop screw shortens the 90 mm extend stroke by up to 75 mm, so the working range is 15-90 mm. Operating pressure is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, and the port is 1/8" PT with an M12x1.75 female rod thread.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and fixed TPU bumpers at both ends absorb end-of-stroke shock. This model carries the optional -S magnet, so CMSE or DMSE reed or solid-state switches mount directly in the body slots. FA flange and LB foot mounts, plus I and Y rod knuckles, bolt to the standard ISO 21287 face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X90-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.