Airtac ACQD Double Acting Compact Cylinder ACQD25X10SB
The AirTAC Airtac ACQD Double Acting Compact Cylinder ACQD25X10SB is a genuine double-acting COMPACT (JIS) cylinder with a piston rod out BOTH ends — a Ø25mm bore and 10mm stroke. The twin rods resist rotation and give equal push and pull force, so it carries and guides a tool platform without a separate anti-rotation guide.
- BoreØ25 mm
- Stroke10 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod
- Rod threadM6×1.0 (F) / M10×1.25 (B)
- CushionBumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACQD Double Acting Compact Cylinder ACQD25X10SB
The AirTAC ACQD25X10SB is a double-acting JIS compact cylinder featuring twin rods extending from both body ends. Because a piston rod occupies each chamber, the annular area remains identical in both directions. This yields an equal push and pull force of 188.9N at 0.5MPa and 264.5N at 0.7MPa, ensuring perfectly symmetric cycle dynamics. The Ø12mm rods provide extended guide length and high torsional resistance without needing an external anti-rotation guide.
Equipped with a male M10x1.25 rod-end thread (-B), it couples directly to tooling platforms. The included magnet (-S) slides within integrated switch grooves, functioning seamlessly with reed or solid-state sensors. Fixed TPU bumpers absorb impact at stroke limits, while the M5x0.8 ports supply air efficiently across the 10mm stroke.
Airtac ACQD Double Acting Compact Cylinder ACQD25X10SB Technical Specifications
| Model | Airtac ACQD Double Acting Compact Cylinder ACQD25X10SB |
|---|---|
| Series | ACQD JIS compact double-rod cylinder |
| Bore size | Ø25 mm |
| Stroke | 10 mm |
| Acting type | Double acting, double rod |
| Port size | M5×0.8 |
| Rod end thread | M6×1.0 female / M10×1.25 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQD datasheet. A rod exits both ends, so both directions use the same annular area. Confirm against the product label before installation.
Theoretical Output Force (Ø25mm — equal both ways)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 189 N | 189 N |
| 0.7 MPa | 264 N | 264 N |
| Max (@1.0 MPa) | 39 kgf | |
Because a rod occupies both chambers, push and pull forces are EQUAL — the annular area applies in each direction. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQD Double Acting Compact Cylinder ACQD25X10SB
| ACQD | JIS compact double-acting DOUBLE-ROD cylinder series. |
|---|---|
| 25 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| B | Male-thread piston rod (omit = female thread). |
Thread: PT standard (G / NPT available). The twin rods resist rotation and add guiding length. Related: ACQ (single rod), ACQJ (adjustable stroke), TACQ (guided).
Where the Airtac ACQD Double Acting Compact Cylinder ACQD25X10SB Is Used
Symmetric Transfer Mechanism
Drives a dual-sided pick-and-place head in electronics assembly, using the equal push/pull force to shuttle components between stations without rotational drift.
Twin-Guided Tooling Platform
Carries a small machining fixture on a packaging line, leveraging the two Ø12mm rods to maintain precise perpendicularity across the 10mm stroke.
Dual-Station Actuation
Indexes a sensor flag on the rear rod while the front rod drives a clamping jaw in a semi-automated lathe, saving space with its compact riveted body.
Is the Airtac ACQD Double Acting Compact Cylinder ACQD25X10SB the Right Cylinder?
For 188.9N bidirectional thrust at 0.5MPa, this 25mm bore is ideal. If lower force suffices, the 20mm bore provides 117.8N. For heavier loads, the 32mm bore offers 301.6N. If your application only requires standard single-rod push action, the ACQ series fits better. For high-energy cycling over the 10mm stroke, consider an external shock absorber since the TPU bumpers are fixed. Confirm the male M10x1.25 thread and M5x0.8 port suit your pneumatics layout.
Quick checklist
- ✓ Equal force both ways at your pressure
- ✓ Anti-rotation needed (twin rods)?
- ✓ Both rod ends usable for tooling?
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Both rods share the load — keep force concentric.
- check Twin rods resist rotation but avoid heavy side load.
- check Handle the C-clip carefully; seat it fully in its groove.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQD Double Acting Compact Cylinder ACQD25X10SB FAQ
It delivers an equal push and pull force of 188.9N at 0.5MPa and 264.5N at 0.7MPa, with a maximum capacity of 39kgf at 1.0MPa. Push and pull forces are identical because the twin rods create equal annular areas on both sides. The maximum standard stroke for this 25mm bore is 100mm.
The -S magnet allows tracking by reed or solid-state switches. Fixed TPU bumpers decelerate the piston at end positions but are not adjustable. Note that a plain ACQD does not hold position on air loss; for fail-safe load holding, install an external rod lock or pilot check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQD Compact Cylinders
Request a Quote for Airtac ACQD Double Acting Compact Cylinder ACQD25X10SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.