Airtac ACQD Double Acting Compact Cylinder ACQD25X80B
The AirTAC Airtac ACQD Double Acting Compact Cylinder ACQD25X80B is a genuine double-acting COMPACT (JIS) cylinder with a piston rod out BOTH ends — a Ø25mm bore and 80mm stroke. The twin rods resist rotation and give equal push and pull force, so it carries and guides a tool platform without a separate anti-rotation guide.
- BoreØ25 mm
- Stroke80 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod
- Rod threadM6×1.0 (F) / M10×1.25 (B)
- CushionBumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACQD Double Acting Compact Cylinder ACQD25X80B
The AirTAC ACQD25X80B is a double-acting JIS compact cylinder featuring a twin-rod design where a piston shaft projects from both body ends. Because a rod occupies each internal chamber, the effective annular area matches in both directions, yielding identical push and pull thrust of 188.9N at 0.5MPa and 264.5N at 0.7MPa. This symmetry is ideal for applications requiring balanced bidirectional cycles.
Twin Ø12mm rods resist torsion and increase bearing length, allowing the unit to support a small tool platform directly without needing an external anti-rotation guide. The body incorporates fixed TPU elastomer bumpers at both ends to decelerate motion near stroke limits, rather than adjustable air cushions. An M10x1.25 male thread on the rod end couples directly to your load, while the M5x0.8 PT port manages pneumatic supply.
Airtac ACQD Double Acting Compact Cylinder ACQD25X80B Technical Specifications
| Model | Airtac ACQD Double Acting Compact Cylinder ACQD25X80B |
|---|---|
| Series | ACQD JIS compact double-rod cylinder |
| Bore size | Ø25 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod |
| Port size | M5×0.8 |
| Rod end thread | M6×1.0 female / M10×1.25 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQD datasheet. A rod exits both ends, so both directions use the same annular area. Confirm against the product label before installation.
Theoretical Output Force (Ø25mm — equal both ways)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 189 N | 189 N |
| 0.7 MPa | 264 N | 264 N |
| Max (@1.0 MPa) | 39 kgf | |
Because a rod occupies both chambers, push and pull forces are EQUAL — the annular area applies in each direction. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQD Double Acting Compact Cylinder ACQD25X80B
| ACQD | JIS compact double-acting DOUBLE-ROD cylinder series. |
|---|---|
| 25 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| B | Male-thread piston rod (omit = female thread). |
Thread: PT standard (G / NPT available). The twin rods resist rotation and add guiding length. Related: ACQ (single rod), ACQJ (adjustable stroke), TACQ (guided).
Where the Airtac ACQD Double Acting Compact Cylinder ACQD25X80B Is Used
Symmetric Transfer Arms
Drives dual-sided pick-and-place arms in electronics assembly, using the equal bidirectional thrust to maintain stable acceleration when shifting components between stations.
Twin-Guided Pusher
Pushes cartons on a packaging line where the two rods prevent chassis twist under offset loads, eliminating the need for a separate external guide rail.
Dual-Station Actuation
Powers a small testing fixture that probes two parts simultaneously, using the second protruding rod end to mount a mechanical flag for a external limit sensor.
Is the Airtac ACQD Double Acting Compact Cylinder ACQD25X80B the Right Cylinder?
With an 80mm stroke, this 25mm bore unit generates 188.9N of force both ways. If less thrust is needed, the 20mm bore provides 117.8N; for heavier duty, the 32mm bore offers 301.6N. Choose a single-rod ACQ if you only need standard extension and can accept unequal push/pull forces. Opt for a fully guided slide like the TACQ if your load exceeds the torsional limits of the twin rods. This specific configuration includes the male rod thread (-B) but omits the internal magnet, so position sensing requires external switches or a retrofitted flag on the second rod end.
Quick checklist
- ✓ Equal force both ways at your pressure
- ✓ Anti-rotation needed (twin rods)?
- ✓ Both rod ends usable for tooling?
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Both rods share the load — keep force concentric.
- check Twin rods resist rotation but avoid heavy side load.
- check Handle the C-clip carefully; seat it fully in its groove.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQD Double Acting Compact Cylinder ACQD25X80B FAQ
The cylinder delivers an equal push and pull force of 188.9N at 0.5MPa and 264.5N at 0.7MPa, with a maximum capacity of 39kgf at 1.0MPa. Forces are identical in both directions because the twin rods create the same effective annular area on each side of the piston. The maximum standard stroke available for this 25mm bore is 100mm.
The dual rods resist torsion and extend the guide length, supporting tools without an external guide. It uses fixed TPU elastomer bumpers at the stroke ends, which are not adjustable. A plain ACQ-type cylinder will not hold a load if air pressure is lost; for fail-safe positioning, you must add an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQD Compact Cylinders
Request a Quote for Airtac ACQD Double Acting Compact Cylinder ACQD25X80B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.