Airtac ACQD Double Acting Compact Cylinder ACQD32X175
The AirTAC Airtac ACQD Double Acting Compact Cylinder ACQD32X175 is a genuine double-acting COMPACT (JIS) cylinder with a piston rod out BOTH ends — a Ø32mm bore and 175mm stroke. The twin rods resist rotation and give equal push and pull force, so it carries and guides a tool platform without a separate anti-rotation guide.
- BoreØ32 mm
- Stroke175 mm
- Port sizePT1/8
- Acting typeDouble acting, double rod
- Rod threadM8×1.25 (F) / M14×1.5 (B)
- CushionBumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACQD Double Acting Compact Cylinder ACQD32X175
The AirTAC ACQD32X175 is a double-acting, double-rod JIS compact cylinder featuring a 32mm bore and a 175mm extended stroke. Because a piston rod protrudes from both ends, the effective annular area is identical in each direction, yielding perfectly equal push and pull forces of 301.6N at 0.5MPa and 422.2N at 0.7MPa. This symmetric thrust is ideal for balanced, two-way actuation cycles.
Twin Ø16mm rods provide inherent anti-rotation support and extended guide length, eliminating the need for a separate external guide in many setups. The second rod end can drive a sensor flag or a secondary load. Built with a compact C-clip riveted body, it uses fixed NBR elastomer bumpers at both ends for end-of-stroke deceleration rather than adjustable air cushions. The body features integrated switch grooves, though this specific SKU ships without a magnet. Note that the 175mm stroke is a made-to-order long-stroke variant exceeding the standard 100mm maximum for this bore.
Airtac ACQD Double Acting Compact Cylinder ACQD32X175 Technical Specifications
| Model | Airtac ACQD Double Acting Compact Cylinder ACQD32X175 |
|---|---|
| Series | ACQD JIS compact double-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQD datasheet. A rod exits both ends, so both directions use the same annular area. Confirm against the product label before installation.
Theoretical Output Force (Ø32mm — equal both ways)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | 422 N |
| Max (@1.0 MPa) | 62 kgf | |
Because a rod occupies both chambers, push and pull forces are EQUAL — the annular area applies in each direction. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQD Double Acting Compact Cylinder ACQD32X175
| ACQD | JIS compact double-acting DOUBLE-ROD cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| B | Male-thread piston rod (omit = female thread). |
Thread: PT standard (G / NPT available). The twin rods resist rotation and add guiding length. Related: ACQ (single rod), ACQJ (adjustable stroke), TACQ (guided).
Where the Airtac ACQD Double Acting Compact Cylinder ACQD32X175 Is Used
Symmetric Transfer Conveyor
Drives a dual-sided pusher on a packaging line, utilizing the equal push and pull thrust to move cartons smoothly in both directions without force imbalance.
Twin-Guided Part Ejector
Ejects machined parts from a CNC lathe; the twin Ø16mm rods resist rotational torque during the extended 175mm ejection cycle, maintaining precise alignment.
Dual-Station Actuation
Powers a two-station clamping fixture on an assembly machine, using the second rod end to trip a mechanical valve or carry a position flag.
Is the Airtac ACQD Double Acting Compact Cylinder ACQD32X175 the Right Cylinder?
For sizing context, the adjacent Ø25 bore yields 188.9N and the larger Ø40 bore yields 527.8N at 0.5MPa. This 175mm extended stroke is a non-standard configuration requiring a long-stroke made-to-order build. Select a single-rod ACQ if equal bidirectional force is unnecessary, or a guided TACQ cylinder if the application demands even higher lateral load resistance. Confirm your porting (PT1/8) and female M8x1.25 rod-end thread when ordering.
Quick checklist
- ✓ Equal force both ways at your pressure
- ✓ Anti-rotation needed (twin rods)?
- ✓ Both rod ends usable for tooling?
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Both rods share the load — keep force concentric.
- check Twin rods resist rotation but avoid heavy side load.
- check Handle the C-clip carefully; seat it fully in its groove.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQD Double Acting Compact Cylinder ACQD32X175 FAQ
The push and pull forces are equal at 301.6N @0.5MPa and 422.2N @0.7MPa, with a maximum force of 61kgf @1.0MPa. The 175mm stroke is a long-stroke made-to-order variant, exceeding the standard 100mm maximum for a Ø32 bore.
No. It uses fixed NBR elastomer bumpers at both ends for deceleration, not adjustable air cushions. Additionally, while the body has sensor grooves, this specific model ships without a magnet. For load holding during air loss, an external rod lock or pilot check valve is required.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQD Compact Cylinders
Request a Quote for Airtac ACQD Double Acting Compact Cylinder ACQD32X175
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.