Airtac ACQD Double Acting Compact Cylinder ACQD32X70
The AirTAC Airtac ACQD Double Acting Compact Cylinder ACQD32X70 is a genuine double-acting COMPACT (JIS) cylinder with a piston rod out BOTH ends — a Ø32mm bore and 70mm stroke. The twin rods resist rotation and give equal push and pull force, so it carries and guides a tool platform without a separate anti-rotation guide.
- BoreØ32 mm
- Stroke70 mm
- Port sizePT1/8
- Acting typeDouble acting, double rod
- Rod threadM8×1.25 (F) / M14×1.5 (B)
- CushionBumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACQD Double Acting Compact Cylinder ACQD32X70
The AirTAC ACQD32X70 is a double-acting JIS compact cylinder featuring twin rods that exit from both ends of its riveted C-clip body. Because a rod occupies each chamber, the annular piston area is identical in both directions, yielding equal push and pull forces of 301.6N at 0.5MPa and 422.2N at 0.7MPa. This symmetric thrust is ideal for precision cycles requiring consistent force both ways.
With a 16mm rod diameter and PT1/8 porting, this 32mm bore unit resists mechanical rotation without needing an external guide. The non-adjustable NBR elastomer bumpers absorb end-of-stroke impact, while the second rod end can drive a secondary load or sensor flag. Note this specific configuration ships without a magnet, though switch grooves remain available.
Airtac ACQD Double Acting Compact Cylinder ACQD32X70 Technical Specifications
| Model | Airtac ACQD Double Acting Compact Cylinder ACQD32X70 |
|---|---|
| Series | ACQD JIS compact double-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 70 mm |
| Acting type | Double acting, double rod |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQD datasheet. A rod exits both ends, so both directions use the same annular area. Confirm against the product label before installation.
Theoretical Output Force (Ø32mm — equal both ways)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | 422 N |
| Max (@1.0 MPa) | 62 kgf | |
Because a rod occupies both chambers, push and pull forces are EQUAL — the annular area applies in each direction. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQD Double Acting Compact Cylinder ACQD32X70
| ACQD | JIS compact double-acting DOUBLE-ROD cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| B | Male-thread piston rod (omit = female thread). |
Thread: PT standard (G / NPT available). The twin rods resist rotation and add guiding length. Related: ACQ (single rod), ACQJ (adjustable stroke), TACQ (guided).
Where the Airtac ACQD Double Acting Compact Cylinder ACQD32X70 Is Used
Symmetric Transfer Unit
Drives a packaging shuttle where identical 301.6N push and pull forces prevent skewed movement during product handoff.
Dual-Station Actuation
Mounts a secondary pick-and-place tool on the second rod end to operate two assembly stations in opposite phase.
Twin-Guided Pusher
Pushes heavy electronic components on a conveyor without twisting, eliminating the need for an external anti-rotation guide.
Is the Airtac ACQD Double Acting Compact Cylinder ACQD32X70 the Right Cylinder?
When sizing this 32mm bore model, consider the adjacent options: the 25mm bore provides 188.9N at 0.5MPa, while the 40mm bore offers 527.8N. If your application only requires unidirectional thrust and standard guiding, a single-rod ACQ series may suffice. For applications demanding higher lateral load capacity and precise anti-rotation over a longer stroke, a guided TACQ cylinder is recommended. Confirm your ordering code specifies the 70mm stroke, female M8x1.25 rod-end thread, and PT porting.
Quick checklist
- ✓ Equal force both ways at your pressure
- ✓ Anti-rotation needed (twin rods)?
- ✓ Both rod ends usable for tooling?
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Both rods share the load — keep force concentric.
- check Twin rods resist rotation but avoid heavy side load.
- check Handle the C-clip carefully; seat it fully in its groove.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQD Double Acting Compact Cylinder ACQD32X70 FAQ
This double-acting cylinder provides equal push and pull forces of 301.6N at 0.5MPa and 422.2N at 0.7MPa, with a maximum force of 61kgf at 1.0MPa. The push and pull forces are identical because the twin rods create equal annular piston areas in both chambers. The maximum standard stroke for this 32mm bore is 100mm.
The twin-rod design inherently resists rotation and extends the guide length, allowing it to carry small platforms without external guides. Impact at stroke ends is absorbed by fixed NBR elastomer bumpers, which are non-adjustable; for high energy loads, slow the approach or add external shock absorbers. Note this model lacks a sensor magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQD Compact Cylinders
Request a Quote for Airtac ACQD Double Acting Compact Cylinder ACQD32X70
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.