Airtac ACQD Double Acting Compact Cylinder ACQD32X75S
The AirTAC Airtac ACQD Double Acting Compact Cylinder ACQD32X75S is a genuine double-acting COMPACT (JIS) cylinder with a piston rod out BOTH ends — a Ø32mm bore and 75mm stroke. The twin rods resist rotation and give equal push and pull force, so it carries and guides a tool platform without a separate anti-rotation guide.
- BoreØ32 mm
- Stroke75 mm
- Port sizePT1/8
- Acting typeDouble acting, double rod
- Rod threadM8×1.25 (F) / M14×1.5 (B)
- CushionBumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACQD Double Acting Compact Cylinder ACQD32X75S
The AirTAC ACQD32X75S is a double-acting JIS compact cylinder featuring twin rods that exit both ends of the body. Because a rod occupies each chamber, the effective annular area is identical in both directions, yielding equal push and pull force of 301.6 N at 0.5 MPa. This symmetry is ideal for applications needing consistent bi-directional power without force drop.
The dual shafts inherently resist rotation and extend the guiding length, eliminating the need for a separate external anti-rotation guide. It incorporates fixed NBR elastomer bumpers at both ends for end-of-stroke deceleration rather than adjustable air cushions. Equipped with the -S magnet, the integrated switch grooves accept reed or solid-state electronic sensors for position detection.
Airtac ACQD Double Acting Compact Cylinder ACQD32X75S Technical Specifications
| Model | Airtac ACQD Double Acting Compact Cylinder ACQD32X75S |
|---|---|
| Series | ACQD JIS compact double-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQD datasheet. A rod exits both ends, so both directions use the same annular area. Confirm against the product label before installation.
Theoretical Output Force (Ø32mm — equal both ways)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | 422 N |
| Max (@1.0 MPa) | 62 kgf | |
Because a rod occupies both chambers, push and pull forces are EQUAL — the annular area applies in each direction. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQD Double Acting Compact Cylinder ACQD32X75S
| ACQD | JIS compact double-acting DOUBLE-ROD cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| B | Male-thread piston rod (omit = female thread). |
Thread: PT standard (G / NPT available). The twin rods resist rotation and add guiding length. Related: ACQ (single rod), ACQJ (adjustable stroke), TACQ (guided).
Where the Airtac ACQD Double Acting Compact Cylinder ACQD32X75S Is Used
Twin-Guided Pusher
Drives a flat indexing pusher on an electronics assembly line, using the dual rods to prevent plate yaw and maintain perfectly square contact.
Symmetric Transfer Arm
Powers a pick-and-place transfer bridge in packaging machinery, leveraging the identical push and pull forces for smooth bi-directional product handling.
Dual-Station Actuation
Actuates a secondary sensor flag or small secondary load from the rear rod end on a CNC cell while the front rod drives the primary clamping action.
Is the Airtac ACQD Double Acting Compact Cylinder ACQD32X75S the Right Cylinder?
At 0.5 MPa, this 32 mm bore generates 301.6 N of equal push and pull force. If your load requires less thrust, the 25 mm bore provides 188.9 N; for heavier payloads, step up to the 40 mm bore offering 527.8 N. If your mechanism only needs force in one direction, a single-rod ACQ cylinder is more compact, while a guided TACQ unit fits applications needing substantial lateral load support. Ensure you specify the 75 mm stroke, PT1/8 port, and female M8x1.25 rod-end threads when ordering.
Quick checklist
- ✓ Equal force both ways at your pressure
- ✓ Anti-rotation needed (twin rods)?
- ✓ Both rod ends usable for tooling?
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Both rods share the load — keep force concentric.
- check Twin rods resist rotation but avoid heavy side load.
- check Handle the C-clip carefully; seat it fully in its groove.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQD Double Acting Compact Cylinder ACQD32X75S FAQ
This double-acting cylinder provides equal push and pull force of 301.6 N at 0.5 MPa and 422.2 N at 0.7 MPa, with a maximum force of 61 kgf at 1.0 MPa. Push and pull forces are equal because the twin rods create matching annular areas. The maximum standard stroke available for the 32 mm bore is 100 mm.
No, a plain ACQD does not hold its load on air loss or when a valve is centered; the rod will drift. The fixed NBR elastomer bumpers only decelerate the piston near stroke ends and do not function as a lock. For fail-safe holding, you must install an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQD Compact Cylinders
Request a Quote for Airtac ACQD Double Acting Compact Cylinder ACQD32X75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.