Airtac ACQD Double Acting Compact Cylinder ACQD80X10SB
The AirTAC Airtac ACQD Double Acting Compact Cylinder ACQD80X10SB is a genuine double-acting COMPACT (JIS) cylinder with a piston rod out BOTH ends — a Ø80mm bore and 10mm stroke. The twin rods resist rotation and give equal push and pull force, so it carries and guides a tool platform without a separate anti-rotation guide.
- BoreØ80 mm
- Stroke10 mm
- Port sizePT3/8
- Acting typeDouble acting, double rod
- Rod threadM16×2.0 (F) / M22×1.5 (B)
- CushionBumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACQD Double Acting Compact Cylinder ACQD80X10SB
The AirTAC ACQD80X10SB is a double-acting JIS compact cylinder where a Ø25mm rod exits both ends. Because both chambers have the same annular area, it delivers an identical 2267.8N force at 0.5MPa in both directions, peaking at 463kgf. This symmetric thrust is ideal for balanced push/pull cycles.
Twin rods resist torsion and double the guide length, removing the need for an external anti-rotation guide. The -S magnet enables tracking with reed or solid-state switches, while the -B male M22x1.5 thread couples directly to your tooling. Fixed NBR bumpers absorb end-of-stroke energy.
Airtac ACQD Double Acting Compact Cylinder ACQD80X10SB Technical Specifications
| Model | Airtac ACQD Double Acting Compact Cylinder ACQD80X10SB |
|---|---|
| Series | ACQD JIS compact double-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 10 mm |
| Acting type | Double acting, double rod |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQD datasheet. A rod exits both ends, so both directions use the same annular area. Confirm against the product label before installation.
Theoretical Output Force (Ø80mm — equal both ways)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | 3175 N |
| Max (@1.0 MPa) | 463 kgf | |
Because a rod occupies both chambers, push and pull forces are EQUAL — the annular area applies in each direction. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQD Double Acting Compact Cylinder ACQD80X10SB
| ACQD | JIS compact double-acting DOUBLE-ROD cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| B | Male-thread piston rod (omit = female thread). |
Thread: PT standard (G / NPT available). The twin rods resist rotation and add guiding length. Related: ACQ (single rod), ACQJ (adjustable stroke), TACQ (guided).
Where the Airtac ACQD Double Acting Compact Cylinder ACQD80X10SB Is Used
Twin-Guided Pusher
Drives a precision stamping platform in press feeders, using the dual rods to maintain tool alignment under offset loads.
Symmetric Transfer
Indexes parts between machining stations on CNC lathes, utilizing the equal push and pull forces for consistent dwell timing.
Dual-Station Actuation
Moves a diverter gate on packaging conveyors, mounting a sensor flag on the second rod end to confirm gate position.
Is the Airtac ACQD Double Acting Compact Cylinder ACQD80X10SB the Right Cylinder?
At 0.5MPa this 80mm bore yields 2267.8N both ways; dropping to a 63mm bore drops force to 1401.5N, while a 100mm bore raises it to 3524.8N. Choose a single-rod ACQ if you need higher extension force than retraction. Confirm the 10mm stroke, PT3/8 port, and male M22x1.5 rod thread when ordering.
Quick checklist
- ✓ Equal force both ways at your pressure
- ✓ Anti-rotation needed (twin rods)?
- ✓ Both rod ends usable for tooling?
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Both rods share the load — keep force concentric.
- check Twin rods resist rotation but avoid heavy side load.
- check Handle the C-clip carefully; seat it fully in its groove.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQD Double Acting Compact Cylinder ACQD80X10SB FAQ
It provides equal push and pull forces of 2267.8N at 0.5MPa and 3175N at 0.7MPa, with a maximum of 463kgf, because the double-rod design creates equal annular areas on both sides. The 10mm stroke is within the 100mm max standard for this 80mm bore. It features a PT3/8 port and a male M22x1.5 rod thread.
No, a plain ACQD does not hold position on air loss; the rod drifts and the fixed NBR bumpers only decelerate near stroke end. For fail-safe holding, you must add an external rod lock or pilot-operated check valve. The twin rods do, however, prevent rotation without needing an external guide.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQD Compact Cylinders
Request a Quote for Airtac ACQD Double Acting Compact Cylinder ACQD80X10SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.