Airtac ACQD Double Acting Compact Cylinder ACQD80X175B
The AirTAC Airtac ACQD Double Acting Compact Cylinder ACQD80X175B is a genuine double-acting COMPACT (JIS) cylinder with a piston rod out BOTH ends — a Ø80mm bore and 175mm stroke. The twin rods resist rotation and give equal push and pull force, so it carries and guides a tool platform without a separate anti-rotation guide.
- BoreØ80 mm
- Stroke175 mm
- Port sizePT3/8
- Acting typeDouble acting, double rod
- Rod threadM16×2.0 (F) / M22×1.5 (B)
- CushionBumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACQD Double Acting Compact Cylinder ACQD80X175B
The AirTAC ACQD80X175B is a double-acting JIS compact cylinder featuring twin Ø25mm rods exiting both ends. Because a rod occupies each chamber, the annular areas match, yielding identical push and pull forces of 2267.8N at 0.5MPa and 3175N at 0.7MPa. This 175mm stroke is a made-to-order long-stroke variant exceeding the standard 100mm maximum for this bore size.
It uses a male M22x1.5 rod-end thread to couple directly to your load. Fixed NBR elastomer bumpers at each end manage end-of-stroke impact, while the extended guide length resists torsional deflection without needing an external guide rail.
Airtac ACQD Double Acting Compact Cylinder ACQD80X175B Technical Specifications
| Model | Airtac ACQD Double Acting Compact Cylinder ACQD80X175B |
|---|---|
| Series | ACQD JIS compact double-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQD datasheet. A rod exits both ends, so both directions use the same annular area. Confirm against the product label before installation.
Theoretical Output Force (Ø80mm — equal both ways)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | 3175 N |
| Max (@1.0 MPa) | 463 kgf | |
Because a rod occupies both chambers, push and pull forces are EQUAL — the annular area applies in each direction. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQD Double Acting Compact Cylinder ACQD80X175B
| ACQD | JIS compact double-acting DOUBLE-ROD cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| B | Male-thread piston rod (omit = female thread). |
Thread: PT standard (G / NPT available). The twin rods resist rotation and add guiding length. Related: ACQ (single rod), ACQJ (adjustable stroke), TACQ (guided).
Where the Airtac ACQD Double Acting Compact Cylinder ACQD80X175B Is Used
Symmetric Transfer Bridge
Drives a dual-sided transfer carriage on packaging lines where matching push and pull forces prevent payload skewing across long 175mm movements.
Twin-Guided Press Tool
Mounts a small stamping platform on CNC machinery using the second rod end to hold a sensor flag, eliminating separate anti-rotation hardware.
Dual-Station Actuation
Powers two linked workstations simultaneously from one body, using the protruding opposite rod end to drive a secondary assembly mechanism.
Is the Airtac ACQD Double Acting Compact Cylinder ACQD80X175B the Right Cylinder?
This 80mm bore delivers 2267.8N of force both ways at 0.5MPa; step down to a 63mm bore for 1401.5N or up to a 100mm bore for 3524.8N if your payload shifts. Choose a single-rod ACQ if you need unequal push-pull forces or a smaller footprint. Confirm the 175mm nonstandard stroke requirement and the M22x1.5 male thread when ordering.
Quick checklist
- ✓ Equal force both ways at your pressure
- ✓ Anti-rotation needed (twin rods)?
- ✓ Both rod ends usable for tooling?
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Both rods share the load — keep force concentric.
- check Twin rods resist rotation but avoid heavy side load.
- check Handle the C-clip carefully; seat it fully in its groove.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQD Double Acting Compact Cylinder ACQD80X175B FAQ
It provides equal push and pull forces of 2267.8N at 0.5MPa and 3175N at 0.7MPa, with a maximum holding capability of 463kgf at 1.0MPa. The 175mm stroke is a nonstandard long-stroke configuration exceeding the 100mm standard maximum for this 80mm bore.
It uses fixed NBR elastomer bumpers at both ends rather than adjustable air cushions. A plain ACQD does not hold its load if air pressure is lost; for fail-safe holding, an external rod lock or pilot-operated check valve is required.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQD Compact Cylinders
Request a Quote for Airtac ACQD Double Acting Compact Cylinder ACQD80X175B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.