Airtac ACQD Double Acting Compact Cylinder ACQD80X75
The AirTAC Airtac ACQD Double Acting Compact Cylinder ACQD80X75 is a genuine double-acting COMPACT (JIS) cylinder with a piston rod out BOTH ends — a Ø80mm bore and 75mm stroke. The twin rods resist rotation and give equal push and pull force, so it carries and guides a tool platform without a separate anti-rotation guide.
- BoreØ80 mm
- Stroke75 mm
- Port sizePT3/8
- Acting typeDouble acting, double rod
- Rod threadM16×2.0 (F) / M22×1.5 (B)
- CushionBumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACQD Double Acting Compact Cylinder ACQD80X75
The AirTAC ACQD80X75 is a double-acting JIS compact cylinder featuring a 25mm piston rod protruding from both ends. Because a rod occupies each chamber, the annular area remains identical in both directions, generating an equal push and pull force of 2267.8N at 0.5MPa and 3175N at 0.7MPa. This symmetric thrust is ideal for balanced cycling, and the unit reaches a maximum capacity of 463kgf at 1.0MPa.
Twin rods provide extended guiding length and high torsional resistance, allowing you to mount a tooling platform directly without needing an external anti-rotation guide. The second rod end can simultaneously drive a sensor flag or a secondary load. Deceleration is handled by fixed NBR elastomer bumpers at both ends, and the body includes magnetic-switch grooves, though this specific SKU ships without a magnet. PT3/8 ports and a female M16x2.0 rod-end thread are standard.
Airtac ACQD Double Acting Compact Cylinder ACQD80X75 Technical Specifications
| Model | Airtac ACQD Double Acting Compact Cylinder ACQD80X75 |
|---|---|
| Series | ACQD JIS compact double-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQD datasheet. A rod exits both ends, so both directions use the same annular area. Confirm against the product label before installation.
Theoretical Output Force (Ø80mm — equal both ways)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | 3175 N |
| Max (@1.0 MPa) | 463 kgf | |
Because a rod occupies both chambers, push and pull forces are EQUAL — the annular area applies in each direction. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQD Double Acting Compact Cylinder ACQD80X75
| ACQD | JIS compact double-acting DOUBLE-ROD cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| B | Male-thread piston rod (omit = female thread). |
Thread: PT standard (G / NPT available). The twin rods resist rotation and add guiding length. Related: ACQ (single rod), ACQJ (adjustable stroke), TACQ (guided).
Where the Airtac ACQD Double Acting Compact Cylinder ACQD80X75 Is Used
Symmetric Transfer Pusher
Drives a dual-sided material handling carriage in packaging machinery, utilizing the equal push and pull thrust to maintain balanced momentum during directional changes.
Twin-Guided Press Tool
Actuates a small stamping or clamping fixture in an assembly line, relying on the two rods to prevent platform rotation under offset loads without needing external guides.
Dual-Station Indexing
Powers a two-station actuation mechanism in electronics manufacturing, using one rod end to move the primary workpiece and the opposite end to trigger a reed or solid-state sensor flag.
Is the Airtac ACQD Double Acting Compact Cylinder ACQD80X75 the Right Cylinder?
Choosing this 80mm bore yields 2267.8N of thrust both ways. If your application requires less force, stepping down to a 63mm bore provides 1401.5N, while moving up to a 100mm bore offers 3524.8N. If your mechanism only needs unidirectional thrust and lacks space for a second rod, a single-rod ACQ series fits better. For loads exceeding the torsional limits of twin rods, consider a guided TACQ cylinder. Confirm your requirements for the 75mm stroke, PT3/8 porting, and female M16x2.0 rod thread when ordering.
Quick checklist
- ✓ Equal force both ways at your pressure
- ✓ Anti-rotation needed (twin rods)?
- ✓ Both rod ends usable for tooling?
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Both rods share the load — keep force concentric.
- check Twin rods resist rotation but avoid heavy side load.
- check Handle the C-clip carefully; seat it fully in its groove.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQD Double Acting Compact Cylinder ACQD80X75 FAQ
This double-acting cylinder provides an equal push and pull force of 2267.8N at 0.5MPa and 3175N at 0.7MPa, with a maximum holding capability of 463kgf at 1.0MPa. Push and pull forces are identical because the twin-rod design creates the same annular area in both chambers. The standard stroke limit for this 80mm bore is 100mm, and it operates safely between 0.15 and 1.0MPa.
It uses fixed NBR elastomer bumpers at both ends for end-of-stroke damping, which are not adjustable. The dual-rod design inherently resists rotation and extends the guide length. A plain ACQ-type cylinder does not hold its load if air pressure is lost; the rod will drift, and the bumper only decelerates near the stroke end. For fail-safe load holding, you must install an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQD Compact Cylinders
Request a Quote for Airtac ACQD Double Acting Compact Cylinder ACQD80X75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.