Airtac ATE Single Acting Guided Compact Cylinder ATE63X15B
The AirTAC Airtac ATE Single Acting Guided Compact Cylinder ATE63X15B is a genuine single acting, pull (spring return) ISO 21287 compact air cylinder with a Ø63mm bore and 15mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke15 mm
- Port size1/8"
- Acting typeSingle acting, pull (spring return)
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
About the Airtac ATE Single Acting Guided Compact Cylinder ATE63X15B
This AirTAC ATE63X15B is a single acting pull cylinder with a spring that extends the rod and air that retracts it, delivering a net pull of 1320 N at 0.5 MPa and 1903.2 N at 0.7 MPa. Its ISO 21287 compact body is about 50% shorter than an ISO 15552 profile cylinder, making it ideal for tight machine frames where space is at a premium.
The hard-anodized aluminium body and S45C hard-chrome plated rod resist wear in continuous cycling, while the fixed TPU bumper absorbs end-of-stroke impacts. With a 63 mm bore and 16 mm rod, this unit offers a practical vertical lift of about 80 kg at 0.5 MPa when you apply a 2:1 safety margin, so you can confidently match it to real part weights.
Airtac ATE Single Acting Guided Compact Cylinder ATE63X15B Technical Specifications
| Model | Airtac ATE Single Acting Guided Compact Cylinder ATE63X15B |
|---|---|
| Series | ATE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 15 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 1320.0 N |
| 0.7 MPa | 1903.2 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa. Single-acting strokes are short (Ø12 to 10 mm, Ø16-100 to 25 mm).
Model Code: Airtac ATE Single Acting Guided Compact Cylinder ATE63X15B
| ATE | ISO 21287 compact cylinder (single-acting pull, spring-return). |
|---|---|
| 63 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ATE Single Acting Guided Compact Cylinder ATE63X15B Is Used
Jig Clamping
Use the 1320 N pull to retract a clamp arm in a CNC fixture, freeing the operator's hands for part loading. The compact body fits under a workholding plate where a longer cylinder would collide with the spindle.
Gate Actuation
Retract a safety gate on a packaging line with the spring extending it to close. The 15 mm stroke matches a small access door, and the fixed bumper prevents hard stops at both ends.
Sorting Pusher
Pull a diverting arm on a conveyor to route boxes to a side lane. The 63 mm bore provides enough force to move lightweight cartons, while the short stroke keeps cycle times fast at 50-500 mm/s.
Is the Airtac ATE Single Acting Guided Compact Cylinder ATE63X15B the Right Cylinder?
For lighter duty, the ATE50X25 offers a 775 N pull at 0.5 MPa, while this 63 mm bore steps up to 1320 N, suiting medium-sized clamping or lifting tasks. The male rod thread (B) simplifies direct coupling to linkages, and the 1/8" port matches common air line fittings. Since the spring returns the rod to its extended position on air loss, it does not hold a mid-stroke load; plan for full extension at rest. The optional -S magnet is not fitted here, so CMSE or DMSE sensors cannot be used unless you order the magnet variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Single-acting: do not force the rod against the spring.
- check Installation by qualified personnel per AirTAC docs.
Airtac ATE Single Acting Guided Compact Cylinder ATE63X15B FAQ
This single acting pull cylinder delivers 1320 N at 0.5 MPa and 1903.2 N at 0.7 MPa, both net of the return spring. Minimum working pressure is 0.2 MPa, and the proof pressure is 1.5 MPa (215 psi). The 63 mm bore uses a 1/8" port and a 16 mm rod.
It follows the ISO 21287 compact standard, so its body is about 50% shorter than an ISO 15552 profile cylinder. This saves mounting space in tight fixtures, and the fixed TPU bumper at both ends absorbs end-of-stroke energy without needing adjustment.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ATE Single Acting Guided Compact Cylinder ATE63X15B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.