Airtac ATE Single Acting Guided Compact Cylinder ATE80X15
The AirTAC Airtac ATE Single Acting Guided Compact Cylinder ATE80X15 is a genuine single acting, pull (spring return) ISO 21287 compact air cylinder with a Ø80mm bore and 15mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke15 mm
- Port size1/4"
- Acting typeSingle acting, pull (spring return)
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
About the Airtac ATE Single Acting Guided Compact Cylinder ATE80X15
A single acting pull cylinder with spring return, the ATE80X15 uses its spring to hold the rod out and compressed air at 0.2 MPa or more to retract it. At 0.5 MPa the 80 mm bore delivers a net pull of 2159.1 N, rising to 3101.6 N at 0.7 MPa, both figures already reduced by the return spring. The 15 mm stroke suits short clamp-and-release moves where the rod must sit extended whenever air is lost.
The ISO 21287 compact body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into guarded assemblies and tight machine frames. A hard-anodized aluminium body carries an S45C hard-chrome rod, and fixed TPU bumpers at both ends absorb end-of-stroke shock. Plan on roughly 1295 N of usable work at 0.5 MPa - about 110 kg lifted vertically with a 2:1 margin - rather than the full rating.
Airtac ATE Single Acting Guided Compact Cylinder ATE80X15 Technical Specifications
| Model | Airtac ATE Single Acting Guided Compact Cylinder ATE80X15 |
|---|---|
| Series | ATE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 15 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 2159.1 N |
| 0.7 MPa | 3101.6 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa. Single-acting strokes are short (Ø12 to 10 mm, Ø16-100 to 25 mm).
Model Code: Airtac ATE Single Acting Guided Compact Cylinder ATE80X15
| ATE | ISO 21287 compact cylinder (single-acting pull, spring-return). |
|---|---|
| 80 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ATE Single Acting Guided Compact Cylinder ATE80X15 Is Used
Press-unload ejection
On a stamping line the spring-extended rod holds an ejector blade in the die area; 2159.1 N of pull at 0.5 MPa retracts it in 15 mm so the finished part can be blown clear, then the blade springs back out.
Gate latch release
In a bottling plant the normally-extended rod keeps a guard-gate latch engaged; losing air fails safe to the latched position, and 0.5 MPa air pulls the 20 mm rod back to open the gate for changeover.
Case hold-down clamp
A case packer uses the spring force to press a hold-down pad onto cartons; a short 15 mm air pull lifts the pad only far enough for the pusher stroke, keeping the cycle fast at 50-500 mm/s.
Is the Airtac ATE Single Acting Guided Compact Cylinder ATE80X15 the Right Cylinder?
At 2159.1 N pull at 0.5 MPa this 80 mm bore sits well above the 63 mm size (1320 N) and below the 100 mm size (3483.6 N); pick 63 mm if your load is under about 800 N of real work, or step to 100 mm for heavy clamping. Remember the spring returns the rod to its extended home position on air loss and will not hold a mid-stroke setting. Bolt on FA/FB flanges, LB feet, CA/CB clevis or SDB pivot brackets, and order the -S code if you need the optional magnet for CMSE / DMSE switches - without -S no magnet is fitted.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Single-acting: do not force the rod against the spring.
- check Installation by qualified personnel per AirTAC docs.
Airtac ATE Single Acting Guided Compact Cylinder ATE80X15 FAQ
Net of the return spring, the 80 mm bore pulls 2159.1 N at 0.5 MPa and 3101.6 N at 0.7 MPa. Working pressure is 0.2-1.0 MPa (28-145 psi) with 1.5 MPa (215 psi) proof, air filtered to 40 um, speed 50-500 mm/s, and -20 to +70 C. The spring extends the rod and air retracts it, so on air loss the rod returns to its extended home position; it does not hold a mid-stroke position and the fixed TPU bumper never locks a load.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body, S45C hard-chrome 20 mm rod and a 1/4" PT port. Mounting brackets - FA/FB flange, LB foot, CA/CB clevis, CR, SDB pivot or FTC - bolt straight to the standard face. Position sensing needs the optional -S magnet code; only then can CMSE or DMSE switches be slid onto the body, and without -S there is no magnet fitted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ATE Single Acting Guided Compact Cylinder ATE80X15
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.