Airtac ATQ Single Acting Thin Cylinder ATQ16X5SB
The AirTAC Airtac ATQ Single Acting Thin Cylinder ATQ16X5SB is a genuine single-acting COMPACT (JIS) cylinder (single acting, pull type) with a Ø16mm bore and 5mm stroke. Air pulles the rod and an internal spring performs the opposite stroke, so one solenoid line drives the motion — ideal for short-stroke clamping and ejection in tight spaces.
- BoreØ16 mm
- Stroke5 mm
- Port sizeM5×0.8
- Acting typeSingle acting, pull type
- Rod threadM4×0.7 (F) / M6×1.0 (B)
- CushionBumper
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ATQ Single Acting Thin Cylinder ATQ16X5SB
The AirTAC ATQ16X5SB is a JIS compact single-acting PULL cylinder where air fed to one M5x0.8 port retracts the 8 mm rod, while an internal spring extends it upon exhaust. This fail-safe extend behavior naturally suits hold-down-release or tensioning logic. The 16 mm bore generates a theoretical pull (before spring) of 75.4 N at 0.5 MPa and 105.6 N at 0.7 MPa, though the return spring lowers net output so confirm exact figures from the datasheet.
Equipped with a male M6x1.0 rod-end thread (-B), it couples directly to your load for simple mechanical integration. The -S magnet enables tracking via reed or solid-state switches in the built-in grooves. Travel is capped at 5 mm here, well under the 20 mm maximum for this bore, and a fixed TPU bumper absorbs end-of-stroke impacts instead of an adjustable air cushion.
Airtac ATQ Single Acting Thin Cylinder ATQ16X5SB Technical Specifications
| Model | Airtac ATQ Single Acting Thin Cylinder ATQ16X5SB |
|---|---|
| Series | ATQ JIS compact single-acting cylinder |
| Bore size | Ø16 mm |
| Stroke | 5 mm |
| Acting type | Single acting, pull type |
| Port size | M5×0.8 |
| Rod end thread | M4×0.7 female / M6×1.0 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Bumper |
| Max standard stroke | Up to 20 mm |
Specifications follow the official AirTAC ACQ-family datasheet. Single-acting types start at 0.2 MPa (the spring must be overcome). Confirm against the product label before installation.
Theoretical Output Force (Ø16mm, Pull)
| Pressure | Pull force (before spring) |
|---|---|
| 0.5 MPa | 75 N |
| 0.7 MPa | 106 N |
These are theoretical air-side forces; the return-spring force reduces the NET usable output. Single-acting pull only — the spring performs the opposite stroke. Confirm the net figure from the datasheet and size with a safety margin.
Model Code: Airtac ATQ Single Acting Thin Cylinder ATQ16X5SB
| ATQ | JIS compact single acting, pull type cylinder series. |
|---|---|
| 16 | Bore size in mm. |
| ×5 | Stroke length in mm (single-acting max 20 mm). |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| B | Male-thread piston rod (omit = female thread). |
Thread: PT standard (G / NPT available). ASQ pushes out / spring returns; ATQ pulls in / spring extends. Related: ACQ (double acting), ACQD (double rod), ACQJ (adjustable stroke).
Where the Airtac ATQ Single Acting Thin Cylinder ATQ16X5SB Is Used
Pin Extraction
Uses the powered retract stroke to pull a locating pin out of a machined fixture during automated unloading.
Gate Retraction
Spring-extends to block items on a packaging line, then pulls the stop gate back 5 mm to release product flow.
Tension Release
Maintains spring tension on a belt or cable drive, retracting slightly to relieve precise mechanical loads.
Is the Airtac ATQ Single Acting Thin Cylinder ATQ16X5SB the Right Cylinder?
For this 16 mm bore with a 5 mm stroke, stepping down to a 12 mm bore yields a 42.4 N theoretical pull at 0.5 MPa, while stepping up to a 20 mm bore provides 117.8 N. If your mechanism needs travel beyond the 20 mm single-acting limit, switch to a double-acting ACQ. To order, confirm the 16 mm bore, 5 mm stroke, the -S magnet, and the -B male M6x1.0 thread.
Quick checklist
- ✓ Net pull force (after spring) at your pressure
- ✓ Stroke ≤ 20 mm (single-acting limit)
- ✓ Single air line saves a valve/port
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa operating pressure.
- check Remember the spring performs the return stroke.
- check Avoid side load on the short piston rod.
- check Handle the C-clip carefully; seat it fully in its groove.
- check Installation by qualified personnel per AirTAC docs.
Airtac ATQ Single Acting Thin Cylinder ATQ16X5SB FAQ
It has a 5 mm stroke (max 20 mm for this 16 mm bore). The theoretical pull before spring is 75.4 N at 0.5 MPa and 105.6 N at 0.7 MPa. A minimum 0.2 MPa operating pressure is required to overcome the internal spring, which extends the rod on exhaust.
It uses a fixed TPU elastomer bumper at the stroke ends to absorb impact, not an adjustable air cushion. The -S option provides a piston magnet compatible with both reed and electronic solid-state switches for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ATQ Cylinders
Request a Quote for Airtac ATQ Single Acting Thin Cylinder ATQ16X5SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.