Airtac ATQ Single Acting Thin Cylinder ATQ32X10B
The AirTAC Airtac ATQ Single Acting Thin Cylinder ATQ32X10B is a genuine single-acting COMPACT (JIS) cylinder (single acting, pull type) with a Ø32mm bore and 10mm stroke. Air pulles the rod and an internal spring performs the opposite stroke, so one solenoid line drives the motion — ideal for short-stroke clamping and ejection in tight spaces.
- BoreØ32 mm
- Stroke10 mm
- Port sizePT1/8
- Acting typeSingle acting, pull type
- Rod threadM8×1.25 (F) / M14×1.5 (B)
- CushionBumper
About the Airtac ATQ Single Acting Thin Cylinder ATQ32X10B
The AirTAC ATQ32X10B is a single-acting PULL-type compact cylinder where air retracts the rod and an internal spring extends it. At 0.5 MPa it provides a 301.6 N theoretical pull, climbing to 422.2 N at 0.7 MPa before spring deduction. This net output is lower, so verify exact figures from the datasheet.
This 32 mm bore unit features a 16 mm piston rod and a PT1/8 port. It includes a male M14x1.5 rod-end thread for direct load coupling. A fixed NBR elastomer bumper handles end-of-stroke impact, and the body retains sensor grooves despite shipping without a magnet.
Airtac ATQ Single Acting Thin Cylinder ATQ32X10B Technical Specifications
| Model | Airtac ATQ Single Acting Thin Cylinder ATQ32X10B |
|---|---|
| Series | ATQ JIS compact single-acting cylinder |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Single acting, pull type |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Bumper |
| Max standard stroke | Up to 30 mm |
Specifications follow the official AirTAC ACQ-family datasheet. Single-acting types start at 0.2 MPa (the spring must be overcome). Confirm against the product label before installation.
Theoretical Output Force (Ø32mm, Pull)
| Pressure | Pull force (before spring) |
|---|---|
| 0.5 MPa | 302 N |
| 0.7 MPa | 422 N |
These are theoretical air-side forces; the return-spring force reduces the NET usable output. Single-acting pull only — the spring performs the opposite stroke. Confirm the net figure from the datasheet and size with a safety margin.
Model Code: Airtac ATQ Single Acting Thin Cylinder ATQ32X10B
| ATQ | JIS compact single acting, pull type cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm (single-acting max 30 mm). |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| B | Male-thread piston rod (omit = female thread). |
Thread: PT standard (G / NPT available). ASQ pushes out / spring returns; ATQ pulls in / spring extends. Related: ACQ (double acting), ACQD (double rod), ACQJ (adjustable stroke).
Where the Airtac ATQ Single Acting Thin Cylinder ATQ32X10B Is Used
Pin Extraction
Uses the powered retraction to draw a locating pin out of a machining fixture when air is applied.
Gate Retraction
Pulls a diverter gate back on a packaging line, allowing the internal spring to safely extend it back into the flow path upon air loss.
Clamp Release
Draws a tensioning clamp open against a return spring to release held materials in an assembly cell.
Is the Airtac ATQ Single Acting Thin Cylinder ATQ32X10B the Right Cylinder?
For lighter duty, the 25 mm bore offers a 188.9 N theoretical pull at 0.5 MPa, while the 40 mm bore provides 527.8 N if your application needs more retraction force. This 10 mm stroke fits within the 30 mm maximum for this bore; for longer travel, select a double-acting ACQ. Confirm you need the male M14x1.5 rod, the PT1/8 port, and no magnet when ordering.
Quick checklist
- ✓ Net pull force (after spring) at your pressure
- ✓ Stroke ≤ 30 mm (single-acting limit)
- ✓ Single air line saves a valve/port
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa operating pressure.
- check Remember the spring performs the return stroke.
- check Avoid side load on the short piston rod.
- check Handle the C-clip carefully; seat it fully in its groove.
- check Installation by qualified personnel per AirTAC docs.
Airtac ATQ Single Acting Thin Cylinder ATQ32X10B FAQ
It delivers a 301.6 N theoretical pull at 0.5 MPa and 422.2 N at 0.7 MPa before the return spring lowers the net output. Operating pressure is 0.2-1.0 MPa (0.2 MPa minimum to overcome the spring), with a maximum stroke of 30 mm for this 32 mm bore.
Loss of air pressure causes the internal spring to extend the rod to its rest position, ideal for hold-down-release logic. Deceleration is handled by a fixed NBR elastomer bumper, not an adjustable cushion, so external shock absorbers may be needed for high-energy cycles.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ATQ Cylinders
Request a Quote for Airtac ATQ Single Acting Thin Cylinder ATQ32X10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.