Airtac ATQ Single Acting Thin Cylinder ATQ32X10SBCB
The AirTAC Airtac ATQ Single Acting Thin Cylinder ATQ32X10SBCB is a genuine single-acting COMPACT (JIS) cylinder (single acting, pull type) with a Ø32mm bore and 10mm stroke. Air pulles the rod and an internal spring performs the opposite stroke, so one solenoid line drives the motion — ideal for short-stroke clamping and ejection in tight spaces.
- BoreØ32 mm
- Stroke10 mm
- Port sizePT1/8
- Acting typeSingle acting, pull type
- Rod threadM8×1.25 (F) / M14×1.5 (B)
- CushionBumper
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ATQ Single Acting Thin Cylinder ATQ32X10SBCB
The AirTAC ATQ32X10SBCB is a JIS compact single-acting PULL cylinder where pressurized air retracts the 16mm rod, while an internal spring drives extension upon exhaust. This fail-safe design automatically extends the rod to its rest position if air pressure drops below the 0.2 MPa minimum, suiting hold-down-release and tensioning logic. The theoretical pull force is 301.6 N at 0.5 MPa and 422.2 N at 0.7 MPa before the return spring lowers the net output, which you should confirm from the datasheet.
Designed for short-stroke automation, this 32mm bore unit features a 10mm travel, well under the 30mm maximum for this size. It integrates a fixed NBR elastomer bumper at each end to soften end-of-stroke impact, rather than an adjustable air cushion. The -S magnet enables position sensing across both reed and solid-state electronic switches, while the -B male M14x1.5 rod end and CB mounting bracket provide direct, versatile load coupling via a PT1/8 port.
Airtac ATQ Single Acting Thin Cylinder ATQ32X10SBCB Technical Specifications
| Model | Airtac ATQ Single Acting Thin Cylinder ATQ32X10SBCB |
|---|---|
| Series | ATQ JIS compact single-acting cylinder |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Single acting, pull type |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Bumper |
| Max standard stroke | Up to 30 mm |
Specifications follow the official AirTAC ACQ-family datasheet. Single-acting types start at 0.2 MPa (the spring must be overcome). Confirm against the product label before installation.
Theoretical Output Force (Ø32mm, Pull)
| Pressure | Pull force (before spring) |
|---|---|
| 0.5 MPa | 302 N |
| 0.7 MPa | 422 N |
These are theoretical air-side forces; the return-spring force reduces the NET usable output. Single-acting pull only — the spring performs the opposite stroke. Confirm the net figure from the datasheet and size with a safety margin.
Model Code: Airtac ATQ Single Acting Thin Cylinder ATQ32X10SBCB
| ATQ | JIS compact single acting, pull type cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm (single-acting max 30 mm). |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| B | Male-thread piston rod (omit = female thread). |
Thread: PT standard (G / NPT available). ASQ pushes out / spring returns; ATQ pulls in / spring extends. Related: ACQ (double acting), ACQD (double rod), ACQJ (adjustable stroke).
Where the Airtac ATQ Single Acting Thin Cylinder ATQ32X10SBCB Is Used
Tensioning Systems
Applies air-side pulling to draw materials taut, relying on the spring to safely release tension upon air loss in textile or printing machinery.
Gate Retraction
Pulls a mechanical stop or diverter gate out of the product flow path on packaging lines, letting the internal spring push it back into blocking position when exhausted.
Clamp Release
Draws back a holding clamp on CNC fixturing to free the workpiece, utilizing the fail-safe extend to maintain clamping pressure during pneumatic outages.
Is the Airtac ATQ Single Acting Thin Cylinder ATQ32X10SBCB the Right Cylinder?
For sizing within the 12-63mm range, stepping down to a 25mm bore yields a 188.9 N theoretical pull at 0.5 MPa, whereas stepping up to a 40mm bore provides 527.8 N. If your application requires travel beyond the 30mm maximum single-acting stroke, the double-acting ACQ series is the correct choice. To order this pull-type configuration correctly, verify the 32mm bore, 10mm stroke, -S magnet for sensors, -B male M14x1.5 rod thread, and the CB mounting accessory.
Quick checklist
- ✓ Net pull force (after spring) at your pressure
- ✓ Stroke ≤ 30 mm (single-acting limit)
- ✓ Single air line saves a valve/port
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa operating pressure.
- check Remember the spring performs the return stroke.
- check Avoid side load on the short piston rod.
- check Handle the C-clip carefully; seat it fully in its groove.
- check Installation by qualified personnel per AirTAC docs.
Airtac ATQ Single Acting Thin Cylinder ATQ32X10SBCB FAQ
This 32mm bore cylinder provides a theoretical pull of 301.6 N at 0.5 MPa and 422.2 N at 0.7 MPa before the return spring reduces net output. It requires a 0.2 MPa minimum operating pressure to overcome the spring, and this 10mm stroke is within the 30mm maximum for this bore size.
The cylinder uses a fixed NBR elastomer bumper at each end to absorb impact rather than an adjustable air cushion. The included -S magnet works with both reed and electronic solid-state switches fitted into the body grooves for precise position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ATQ Cylinders
Request a Quote for Airtac ATQ Single Acting Thin Cylinder ATQ32X10SBCB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.