Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD63X75
The AirTAC Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD63X75 is a genuine double-acting profile-type standard air cylinder with a Ø63mm bore and 75mm stroke, 3/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ63 mm
- Stroke75 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD63X75
The B06-SAUD63X75 is an AirTAC double-acting, double-rod profile cylinder built for battery manufacturing. The B06- prefix marks this as a battery-dedicated variant, mechanically identical to the SAUD63X75. It features a 63mm bore, 75mm stroke, and a 3/8 inch port. Because a rod exits both ends, the output force is equal in both directions, delivering 1402 N each way at 0.5 MPa.
This extruded aluminum profile body is shorter than an ISO 15552 cylinder of the same bore. The twin rods provide anti-rotation guidance and drive two tools simultaneously. Without a -S suffix, this SKU lacks a magnet and cannot accept CMSG or DMSG sensors. For sizing, the safe working load is roughly 841 N (about 60 percent of the 0.5 MPa force), allowing a vertical lift of approximately 71 kg with a 2:1 margin.
Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD63X75 Technical Specifications
| Model | Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD63X75 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø63 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD63X75
| SAU | Profile-type standard cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD63X75 Is Used
Cell Stacking
Aligns and presses battery cells during module stacking with equal push and pull force to prevent twisting.
Tab Welding
Drives twin welding heads simultaneously from both rod ends for synchronized busbar joining.
Pack Handling
Transfers battery packs on a conveyor using the anti-rotation guidance of the dual rods.
Is the Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD63X75 the Right Cylinder?
Select this 63mm bore if your battery line needs 1402 N of equal push and pull force at 0.5 MPa. Step down to the 50mm bore for 825 N, or up to the 80mm bore for 2268 N. The double-rod layout is ideal for anti-rotation tasks, twin tooling, or carrying a switch cam on the back rod. Mounting is limited to Basic, FA, and LB styles, matching the AirTAC SC series. Since this 75mm stroke is under 300mm, side-load guide requirements are minimal. Note that this non-magnet SKU cannot host sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD63X75 FAQ
The B06- prefix designates this as the battery-manufacturing dedicated variant of the SAUD63X75, sharing identical specs. Force is equal both ways: 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa. It uses a 3/8 inch port.
No, this SKU lacks the -S magnet and cannot accept sensors. The air cushions only decelerate near stroke end; they do not hold loads. For vertical load holding on air loss, use an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD63X75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.