Airtac GAFC Air Service Unit GAFC200C06ALNK
The AirTAC Airtac GAFC Air Service Unit GAFC200C06ALNK is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
- TypeF.R.L. combination
- Port size1/8"
- Pressure range0.15 - 0.4 MPa (20 - 58 psi)
- Filtering grade40 µm
- Bowl materialMetal
- Drainautomatic
- Pressure gaugeNot fitted
- Weight590 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAFC Air Service Unit GAFC200C06ALNK
This AirTAC GAFC200C06ALNK is a compact F.R.L. combination built from two units on one T-shape bracket: a filter-regulator body and a separate lubricator. The 1/8in port size and 590 g mass make it a lightweight choice for small jigs or single actuators where space is tight. The lower-pressure type regulates from 0.15 to 0.4 MPa (20-58 psi), and the 40 um element handles standard shop air.
Air enters the filter-regulator first, where solids and moisture are removed and pressure is set, then the lubricator adds a metered oil mist downstream. The metal bowl (C code) is fitted, and the automatic drain clears condensate without an operator. No gauge is supplied, so the set pressure cannot be read without adding one to the 1/8in gauge connection. The reverse-flow (reflux) valve is fitted as a separate pneumatic symbol.
Airtac GAFC Air Service Unit GAFC200C06ALNK Technical Specifications
| Model | Airtac GAFC Air Service Unit GAFC200C06ALNK |
|---|---|
| Series | GAFC200 F.R.L. combination |
| Port size | 1/8" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 590 g |
Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFC200 is 1/8" if you add one.
Model Code: Airtac GAFC Air Service Unit GAFC200C06ALNK
| GAFC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAFR200-06 filter & regulator, GAL200-06 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.
Size Class & Flow Envelope
- GAFC2001/8"-1/4" · 1750 L/min
- GAFC3001/4"-1/2" · 3500 L/min
- GAFC4003/8"-1/2" · 6000 L/min
- GAFC5003/4" · 7000 L/min
- GAFC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFC200 · 1/8" · curve to 1750 L/min |
|---|---|
| One size up | GAFC300 (curve to 3500 L/min) |
| Build order | Filter & regulator → bracket → lubricator |
Where the Airtac GAFC Air Service Unit GAFC200C06ALNK Is Used
Small jig clamping
Feed a single pneumatic clamp on a benchtop assembly jig with regulated air up to 0.4 MPa, keeping the actuation gentle and controlled.
Lab air supply
Supply a small laboratory fixture or test rig that needs clean, lubricated air at a modest pressure without a large footprint.
Maintenance bench
Power a small air tool or blow gun on a maintenance bench where space is limited and lower pressure is acceptable for the task.
Is the Airtac GAFC Air Service Unit GAFC200C06ALNK the Right Air-Prep Unit?
Choose this GAFC200C06ALNK when your circuit needs lower regulated pressure up to 0.4 MPa and an automatic drain for unattended operation. The 25 cc drain bowl and 36 cc oil bowl are small, so plan for more frequent attention than a larger body. The metal bowl is a build choice; the shared specification of 1.0 MPa max and -5 to 70 C applies, so confirm the material suits your surroundings. The 5 um element option is available if you need finer filtration, and the PT thread with MPa/psi gauge scale is the default. Spare parts are orderable separately as the GAFR200-06 filter & regulator and the GAL200-06 lubricator. With a 1.0 MPa max supply, you have about 0.6 MPa of headroom above the 0.4 MPa top of the regulated range.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter-regulator first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 590 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR200-06 filter-regulator on that branch instead of the full combination.
Airtac GAFC Air Service Unit GAFC200C06ALNK FAQ
This F.R.L. combination operates from 0.15 to 0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). It has a 25 cc drain bowl and a 36 cc oil bowl, weighs 590 g, and is rated for -5 to 70 C. Use ISO VG 32 lubricant.
The N after the port code means no gauge is supplied with this GAFC200C06ALNK. If you need to read the set pressure, you can add a gauge to the 1/8in gauge connection on the body. The PT thread is the default with an MPa/psi scale.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFC Air Service Unit GAFC200C06ALNK
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.