Airtac GAFC Air Service Unit GAFC200C06ASK
The AirTAC Airtac GAFC Air Service Unit GAFC200C06ASK is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination
- Port size1/8"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- Bowl materialMetal
- Drainautomatic
- Pressure gaugeCircular, MPa / psi
- Weight590 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAFC Air Service Unit GAFC200C06ASK
This AirTAC GAFC200C06ASK is a two-piece F.R.L. combination: a filter-regulator body paired with a lubricator, mounted on a shared T-bracket with quick clamps. Air enters the 1/8in port, gets filtered by the 40 um element and regulated to 0.15-0.9 MPa (20-130 psi), then oil mist is metered in downstream. The metal bowl holds 25 cc of condensate while the oil bowl holds 36 cc, and the whole assembly weighs 590 g.
The automatic drain clears collected water without an operator, and a circular gauge with an MPa/psi scale shows the set pressure. A reverse-flow valve is fitted. Since the lubricator is designed to carry ISO VG 32 oil, this unit is for lines where controlled lubrication is wanted, not for oil-free air delivery.
Airtac GAFC Air Service Unit GAFC200C06ASK Technical Specifications
| Model | Airtac GAFC Air Service Unit GAFC200C06ASK |
|---|---|
| Series | GAFC200 F.R.L. combination |
| Port size | 1/8" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 590 g |
Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code.
Model Code: Airtac GAFC Air Service Unit GAFC200C06ASK
| GAFC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAFR200-06 filter & regulator, GAL200-06 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.
Size Class & Flow Envelope
- GAFC2001/8"-1/4" · 1750 L/min
- GAFC3001/4"-1/2" · 3500 L/min
- GAFC4003/8"-1/2" · 6000 L/min
- GAFC5003/4" · 7000 L/min
- GAFC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFC200 · 1/8" · curve to 1750 L/min |
|---|---|
| One size up | GAFC300 (curve to 3500 L/min) |
| Build order | Filter & regulator → bracket → lubricator |
Where the Airtac GAFC Air Service Unit GAFC200C06ASK Is Used
Compact jig clamping
Feed a single pneumatic clamp on a benchtop assembly fixture where the 1/8in port and 590 g weight suit a small frame, and the automatic drain keeps the bowl clear during long production runs.
Lab air bench
Supply a small test rig or air bearing with filtered, regulated air at a set point up to 0.9 MPa, with the metal bowl resisting accidental knocks in a busy lab environment.
Maintenance cart
Mount on a portable service cart to provide clean, lubricated air to handheld pneumatic tools, where the 36 cc oil bowl supports several hours of tool operation before a refill.
Is the Airtac GAFC Air Service Unit GAFC200C06ASK the Right Air-Prep Unit?
The GAFC200 is the smallest body in the GAFC range, with its 1/8in port suiting compact jigs or a single actuator. The metal bowl is specified by the C code, and the common specification of 1.0 MPa max and -5 to 70 C applies regardless of bowl material, so confirm the metal suits your environment. The automatic drain (A) removes condensate without manual attention, and the standard type (S) regulates from 0.15 to 0.9 MPa (20-130 psi). A gauge is fitted, reading MPa/psi for the PT thread. The 40 um element handles general workshop air, and the reverse-flow valve is included. Spare parts are the GAFR200-06 filter-regulator and GAL200-06 lubricator, both orderable separately. With a 1.0 MPa max supply, there is about 0.1 MPa of headroom above the 0.9 MPa top of the regulated range, so plan the inlet pressure accordingly.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter-regulator first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 590 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR200-06 filter-regulator on that branch instead of the full combination.
Airtac GAFC Air Service Unit GAFC200C06ASK FAQ
The GAFC200C06ASK is a standard-type F.R.L. combination with a working pressure range of 0.15-0.9 MPa (20-130 psi). Maximum pressure is 1.0 MPa (145 psi) and proof pressure is 1.5 MPa (215 psi). It operates from -5 to 70 C and must not freeze. The drain bowl holds 25 cc, the oil bowl holds 36 cc, and the unit weighs 590 g. Use ISO VG 32 oil in the lubricator.
The C code specifies a metal bowl, which is a build choice for the unit's surroundings; the catalogue does not provide impact or chemical resistance data, so confirm it suits your environment. The K code means a reverse-flow (reflux) valve is fitted, shown as a separate symbol in the catalogue. Both features are part of the ordering code and do not change the pressure range or flow envelope.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFC Air Service Unit GAFC200C06ASK
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.