Airtac GAFC Air Service Unit GAFC200C06SNW
The AirTAC Airtac GAFC Air Service Unit GAFC200C06SNW is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination
- Port size1/8"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- Bowl materialMetal
- Drainsemi-auto + manual
- Pressure gaugeNot fitted
- Weight590 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAFC Air Service Unit GAFC200C06SNW
This AirTAC GAFC200C06SNW is a compact F.R.L. combination that pairs a filter-regulator with a lubricator on a single T-bracket. The filter and regulator share one body, so this 1/8in unit delivers filtered, pressure-set air before the lubricator adds a controlled oil mist as the final step.
The metal bowl holds 25 cc of condensate and the oil bowl holds 36 cc, with the whole assembly weighing 590 g. It operates from 0.15 to 0.9 MPa (20-130 psi) and uses a 5 um element for finer filtration. No gauge is fitted, so the 1/8in gauge connection is available if you need to add one later.
Airtac GAFC Air Service Unit GAFC200C06SNW Technical Specifications
| Model | Airtac GAFC Air Service Unit GAFC200C06SNW |
|---|---|
| Series | GAFC200 F.R.L. combination |
| Port size | 1/8" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 590 g |
Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFC200 is 1/8" if you add one.
Model Code: Airtac GAFC Air Service Unit GAFC200C06SNW
| GAFC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAFR200-06 filter & regulator, GAL200-06 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.
Size Class & Flow Envelope
- GAFC2001/8"-1/4" · 1750 L/min
- GAFC3001/4"-1/2" · 3500 L/min
- GAFC4003/8"-1/2" · 6000 L/min
- GAFC5003/4" · 7000 L/min
- GAFC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFC200 · 1/8" · curve to 1750 L/min |
|---|---|
| One size up | GAFC300 (curve to 3500 L/min) |
| Build order | Filter & regulator → bracket → lubricator |
Where the Airtac GAFC Air Service Unit GAFC200C06SNW Is Used
Precision Valve Control
Feed a single pneumatic valve or small actuator on a benchtop assembly station with 5 um filtered air, protecting fine internal clearances from particle wear.
Compact Jig Operation
Power a small clamping jig on a manual workbench where the 590 g weight and 1/8in ports fit easily into tight machine frames without heavy support structures.
Laboratory Air Supply
Supply a lab test rig that needs regulated pressure and fine filtration for sensitive instruments, with the metal bowl handling occasional condensate without visibility issues.
Is the Airtac GAFC Air Service Unit GAFC200C06SNW the Right Air-Prep Unit?
Choose the GAFC200C06SNW when you need a compact 1/8in air prep unit for a single actuator or small jig. The metal bowl is specified by the C code, and the 5 um element traps finer particles than the standard 40 um grade, which suits precision valves but requires more frequent element service. The semi-auto drain dumps condensate each time pressure drops, while the manual drain gives you on-demand control. The N code means no gauge is supplied, so plan to add one at the 1/8in connection if operators need to read the set pressure. The default PT thread reads in MPa and psi on a gauge. For oil-free lines, omit the lubricator and choose a plain GAFR200-06 filter-regulator instead. Spare parts are orderable separately as GAFR200-06 and GAL200-06. With a 1.0 MPa max supply, you have about 0.1 MPa above the 0.9 MPa top of the regulated range, so plan your inlet pressure carefully if you need maximum output.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter-regulator first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 590 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR200-06 filter-regulator on that branch instead of the full combination.
Airtac GAFC Air Service Unit GAFC200C06SNW FAQ
This F.R.L. combination operates from 0.15 to 0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). It works in temperatures from -5 to 70 C and requires ISO VG 32 lubricant. The drain bowl holds 25 cc, the oil bowl holds 36 cc, and the complete unit weighs 590 g.
The C code specifies a metal bowl, which is a build choice for your environment - the catalogue gives no performance difference between bowl materials, so confirm it suits your surroundings. The N code means no gauge is included; the 1/8in gauge connection is there if you want to add one later to read the set pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFC Air Service Unit GAFC200C06SNW
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.