Airtac GAFC Air Service Unit GAFC200C06SW
The AirTAC Airtac GAFC Air Service Unit GAFC200C06SW is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination
- Port size1/8"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- Bowl materialMetal
- Drainsemi-auto + manual
- Pressure gaugeCircular, MPa / psi
- Weight590 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAFC Air Service Unit GAFC200C06SW
This GAFC200C06SW is a compact F.R.L. combination built from a filter-regulator and a lubricator mounted on a single T-bracket with quick clamps. The 1/8in port and 590 g mass place it in the smallest GAFC size class, suited for a single actuator or a small bench jig rather than a machine-wide header. Its 5 um element traps finer particles than the standard 40 um grade, which suits precision valves or instrument air lines.
Air enters the first body where the filter element removes solids and moisture, and the regulator sets pressure within 0.15-0.9 MPa (20-130 psi). The lubricator then adds a metered ISO VG 32 oil mist downstream, so oil never travels back through the regulator seat. The metal bowl is specified by the C code, and the circular gauge reads in MPa/psi for the PT thread. Both the 25 cc condensate bowl and 36 cc oil bowl are visible for service checks.
Airtac GAFC Air Service Unit GAFC200C06SW Technical Specifications
| Model | Airtac GAFC Air Service Unit GAFC200C06SW |
|---|---|
| Series | GAFC200 F.R.L. combination |
| Port size | 1/8" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 590 g |
Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code.
Model Code: Airtac GAFC Air Service Unit GAFC200C06SW
| GAFC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAFR200-06 filter & regulator, GAL200-06 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.
Size Class & Flow Envelope
- GAFC2001/8"-1/4" · 1750 L/min
- GAFC3001/4"-1/2" · 3500 L/min
- GAFC4003/8"-1/2" · 6000 L/min
- GAFC5003/4" · 7000 L/min
- GAFC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFC200 · 1/8" · curve to 1750 L/min |
|---|---|
| One size up | GAFC300 (curve to 3500 L/min) |
| Build order | Filter & regulator → bracket → lubricator |
Where the Airtac GAFC Air Service Unit GAFC200C06SW Is Used
Precision valve control
Feed a single pneumatic valve or a small precision regulator station where the 5 um element protects fine internal passages from particle wear.
Bench assembly jig
Power a compact bench-mounted clamping or pressing jig in a workshop, where the 1/8in port and 590 g weight suit a small frame.
Instrument air supply
Supply a laboratory instrument or a test rig that needs cleaner air than standard shop air, using the 5 um element to reduce particle load.
Is the Airtac GAFC Air Service Unit GAFC200C06SW the Right Air-Prep Unit?
The GAFC200 body with a 1/8in port is the entry point of the series, and the 5 um element (W) makes it a finer-filtration choice than the standard 40 um grade. The metal bowl (C) is a build specification; the shared -5 to 70 C and 1.0 MPa maximum apply regardless of material, so confirm the metal suits your environment. The semi-auto drain dumps condensate each time pressure drops, while the manual drain gives on-demand control. The PT thread carries a circular gauge scaled in MPa/psi. If you need a lower 0.15-0.4 MPa range, the L type is available on this body, and a reverse-flow valve can be added with the K option. Replacement units are orderable as GAFR200-06 and GAL200-06. With a 1.0 MPa max supply, you have about 0.1 MPa of headroom above the 0.9 MPa top of the regulated range, so plan the inlet pressure accordingly.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter-regulator first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 590 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR200-06 filter-regulator on that branch instead of the full combination.
Airtac GAFC Air Service Unit GAFC200C06SW FAQ
The GAFC200C06SW operates on air with a standard pressure range of 0.15-0.9 MPa (20-130 psi). Maximum pressure is 1.0 MPa (145 psi) and proof pressure is 1.5 MPa (215 psi). Temperature range is -5 to 70 C. The drain bowl holds 25 cc and the oil bowl holds 36 cc. Recommended lubricant is ISO VG 32. The unit weighs 590 g.
The C code specifies a metal bowl as a build choice; the catalogue does not print impact or chemical resistance data, so confirm it suits your surroundings. The W code specifies a 5 um element instead of the standard 40 um, which traps finer particles for sensitive equipment but requires more frequent element service.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFC Air Service Unit GAFC200C06SW
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.