Airtac GAFC Air Service Unit GAFC200N06ALN
The AirTAC Airtac GAFC Air Service Unit GAFC200N06ALN is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
- TypeF.R.L. combination
- Port size1/8"
- Pressure range0.15 - 0.4 MPa (20 - 58 psi)
- Filtering grade40 µm
- Bowl materialNylon
- Drainautomatic
- Pressure gaugeNot fitted
- Weight590 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAFC Air Service Unit GAFC200N06ALN
The GAFC200N06ALN is a two-piece F.R.L. combination: a filter-regulator body paired with a lubricator, mounted on a T-bracket with quick clamps. Air is cleaned and pressure-set in the first body, then the lubricator adds a metered oil mist last, so oil never travels back through the regulator seat. This 1/8in port unit weighs 590 g and carries a 25 cc condensate bowl alongside a 36 cc oil bowl.
This lower-pressure model regulates from 0.15 to 0.4 MPa (20-58 psi), with a 40 um element and an automatic drain. The nylon bowl is specified by the N before the port code; the catalogue's common specification of 1.0 MPa (145 psi) max and -5 to 70 C applies regardless of bowl material. No gauge is fitted, so the 1/8in gauge connection is available if you add one later.
Airtac GAFC Air Service Unit GAFC200N06ALN Technical Specifications
| Model | Airtac GAFC Air Service Unit GAFC200N06ALN |
|---|---|
| Series | GAFC200 F.R.L. combination |
| Port size | 1/8" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 590 g |
Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFC200 is 1/8" if you add one.
Model Code: Airtac GAFC Air Service Unit GAFC200N06ALN
| GAFC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAFR200-06 filter & regulator, GAL200-06 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.
Size Class & Flow Envelope
- GAFC2001/8"-1/4" · 1750 L/min
- GAFC3001/4"-1/2" · 3500 L/min
- GAFC4003/8"-1/2" · 6000 L/min
- GAFC5003/4" · 7000 L/min
- GAFC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFC200 · 1/8" · curve to 1750 L/min |
|---|---|
| One size up | GAFC300 (curve to 3500 L/min) |
| Build order | Filter & regulator → bracket → lubricator |
Where the Airtac GAFC Air Service Unit GAFC200N06ALN Is Used
Precision Jig Fixtures
Feed a single pneumatic clamp or small indexing fixture on a benchtop assembly station. The 1/8in port and 590 g mass suit a compact mount, while the lower pressure range protects delicate workpieces from over-force.
Laboratory Air Supply
Supply filtered, regulated air to a lab bench valve or small test rig that must not exceed 0.4 MPa. The automatic drain keeps condensate out of sensitive instrumentation between experiments.
Paint Spray Booth
Run a small spray gun or air blow-off nozzle in a finishing booth. The 40 um element removes particulates, and the lower pressure setting matches typical spray application requirements without wasting air.
Is the Airtac GAFC Air Service Unit GAFC200N06ALN the Right Air-Prep Unit?
Choose the GAFC200N06ALN for a compact 1/8in line where the machine runs below 0.4 MPa and you want the automatic drain to clear condensate without an operator. The nylon bowl is a build choice; confirm it suits your surroundings, as the catalogue gives no material-specific ratings. The L type tops out at 0.4 MPa, so if your process may ever need more pressure, step to the standard S type instead. The 40 um element handles general shop air; upgrade to W for 5 um filtration if you feed precision valves. The PT thread carries an MPa/psi gauge scale, though this model ships without a gauge. For oil-free lines, omit the lubricator and choose a plain GAFR200-06 filter-regulator. Spares are GAFR200-06 and GAL200-06. With a 1.0 MPa (145 psi) max supply, you have about 0.6 MPa of headroom above the 0.4 MPa top of the regulated range.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter-regulator first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 590 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR200-06 filter-regulator on that branch instead of the full combination.
Airtac GAFC Air Service Unit GAFC200N06ALN FAQ
This F.R.L. combination operates from 0.15 to 0.4 MPa (20-58 psi), with a max pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). It has a 25 cc drain bowl and a 36 cc oil bowl, weighs 590 g, and is rated for -5 to 70 C. The recommended lubricant is ISO VG 32 or equivalent. The 40 um element handles standard shop air filtration.
The N after the port code means no gauge is supplied with this unit. The gauge connection is 1/8in, so you can add a compatible gauge later if you need to read the set pressure. The N before the port code specifies a nylon bowl, which is a separate option from the gauge code.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFC Air Service Unit GAFC200N06ALN
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.