Airtac GAFC Air Service Unit GAFC200N06ASNW
The AirTAC Airtac GAFC Air Service Unit GAFC200N06ASNW is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination
- Port size1/8"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- Bowl materialNylon
- Drainautomatic
- Pressure gaugeNot fitted
- Weight590 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAFC Air Service Unit GAFC200N06ASNW
This GAFC200N06ASNW is a two-piece F.R.L. combination: a filter-regulator body paired with a lubricator on a shared T-bracket. The 1/8in port and 590 g mass suit small jigs or a single actuator, and the nylon bowl keeps the build light. Air is cleaned and set to 0.15-0.9 MPa (20-130 psi) in the first body, then the lubricator meters oil mist into the flow last, so oil never travels back through the regulator seat.
The 5 um element traps finer particles than the standard 40 um grade, which protects precision valves but means more frequent element service. With no gauge fitted, the gauge connection is 1/8in if you add one later. The automatic drain clears condensate from the 25 cc bowl without operator attention, while the 36 cc oil bowl holds enough ISO VG 32 for extended runs.
Airtac GAFC Air Service Unit GAFC200N06ASNW Technical Specifications
| Model | Airtac GAFC Air Service Unit GAFC200N06ASNW |
|---|---|
| Series | GAFC200 F.R.L. combination |
| Port size | 1/8" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 590 g |
Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFC200 is 1/8" if you add one.
Model Code: Airtac GAFC Air Service Unit GAFC200N06ASNW
| GAFC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAFR200-06 filter & regulator, GAL200-06 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.
Size Class & Flow Envelope
- GAFC2001/8"-1/4" · 1750 L/min
- GAFC3001/4"-1/2" · 3500 L/min
- GAFC4003/8"-1/2" · 6000 L/min
- GAFC5003/4" · 7000 L/min
- GAFC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFC200 · 1/8" · curve to 1750 L/min |
|---|---|
| One size up | GAFC300 (curve to 3500 L/min) |
| Build order | Filter & regulator → bracket → lubricator |
Where the Airtac GAFC Air Service Unit GAFC200N06ASNW Is Used
Precision Valve Protection
Feed a 5 um filtered, regulated air supply to a small pneumatic valve manifold on a benchtop assembly station, where fine particles could otherwise cause spool sticking.
Single Actuator Control
Supply a compact clamping cylinder on a drilling fixture with oil-misted air, using the automatic drain to handle condensate from humid shop air without daily checks.
Instrument Air Prepping
Prepare air for a lab-scale pneumatic test rig where the 5 um element removes fine contaminants and the lower flow demand matches the 1/8in port and 1750 L/min plotted envelope at 0.7 MPa inlet.
Is the Airtac GAFC Air Service Unit GAFC200N06ASNW the Right Air-Prep Unit?
Choose this GAFC200N06ASNW when your line needs fine filtration and unattended condensate removal at a compact 1/8in port size. The nylon bowl is a material choice, not a performance upgrade, so confirm it suits your environment before ordering. The automatic drain (A) is the key difference from the blank-drain version, which requires manual or semi-auto dumping. The 5 um element (W) trades service life for finer filtration, and the missing gauge (N) means you must add one to read set pressure.
The two units are orderable separately as GAFR200-06 and GAL200-06, so a clogged element or damaged bowl does not force a full replacement. If your line must stay oil-free, skip this set and choose a plain GAFR filter-regulator instead. The 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the regulated range, so plan your inlet pressure accordingly.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter-regulator first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 590 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR200-06 filter-regulator on that branch instead of the full combination.
Airtac GAFC Air Service Unit GAFC200N06ASNW FAQ
The working pressure range is 0.15-0.9 MPa (20-130 psi), with a max pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C and must not freeze. The drain bowl holds 25 cc and the oil bowl holds 36 cc. Recommended lubricant is ISO VG 32, and the unit weighs 590 g.
The N after the port code means no gauge is supplied with the unit. The gauge connection is 1/8in if you choose to add one later. Without a gauge, you cannot read the set pressure directly on the unit, so plan to install one if your process requires pressure verification.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFC Air Service Unit GAFC200N06ASNW
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.