Airtac GAFC Air Service Unit GAFC200N06L
The AirTAC Airtac GAFC Air Service Unit GAFC200N06L is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
- TypeF.R.L. combination
- Port size1/8"
- Pressure range0.15 - 0.4 MPa (20 - 58 psi)
- Filtering grade40 µm
- Bowl materialNylon
- Drainsemi-auto + manual
- Pressure gaugeCircular, MPa / psi
- Weight590 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAFC Air Service Unit GAFC200N06L
This GAFC200N06L is a compact F.R.L. combination built for light-duty circuits. The filter and regulator share one body, so the set is two pieces on a T-bracket: the first body cleans the air and sets it to a lower pressure range, then the lubricator adds a metered oil mist last. With a 1/8in port and a 590 g mass, it suits small jigs, single actuators, or a short branch line where space is tight.
The lower-pressure type regulates from 0.15 to 0.4 MPa (20-58 psi), which is about 44% of the standard 0.9 MPa ceiling. The nylon bowl holds 25 cc of condensate, while the separate oil bowl holds 36 cc. A circular gauge is fitted, reading MPa and psi on the same dial. The 40 um element handles general workshop air, and the semi-auto drain dumps condensate each time pressure drops, with a manual drain for on-demand release.
Airtac GAFC Air Service Unit GAFC200N06L Technical Specifications
| Model | Airtac GAFC Air Service Unit GAFC200N06L |
|---|---|
| Series | GAFC200 F.R.L. combination |
| Port size | 1/8" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 590 g |
Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code.
Model Code: Airtac GAFC Air Service Unit GAFC200N06L
| GAFC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAFR200-06 filter & regulator, GAL200-06 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.
Size Class & Flow Envelope
- GAFC2001/8"-1/4" · 1750 L/min
- GAFC3001/4"-1/2" · 3500 L/min
- GAFC4003/8"-1/2" · 6000 L/min
- GAFC5003/4" · 7000 L/min
- GAFC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFC200 · 1/8" · curve to 1750 L/min |
|---|---|
| One size up | GAFC300 (curve to 3500 L/min) |
| Build order | Filter & regulator → bracket → lubricator |
Where the Airtac GAFC Air Service Unit GAFC200N06L Is Used
Bench Press Safety Valve
Feed a small bench press cylinder with regulated air at 0.3 MPa. The lower-pressure range keeps the force low, while the lubricator oils the cylinder seals with each cycle.
Solder Paste Dispenser
Supply a solder paste dispenser with clean, oil-misted air at 0.25 MPa. The 40 um element removes particles that could clog the nozzle, and the compact 590 g body fits on a benchtop.
Lab Vacuum Generator
Run a small vacuum generator for pick-and-place tasks in a lab setup. The lower-pressure range protects delicate components, and the nylon bowl is light enough for a frame mount.
Is the Airtac GAFC Air Service Unit GAFC200N06L the Right Air-Prep Unit?
Choose the GAFC200 for a 1/8in port and light air prep duty. The nylon bowl is a build choice - the common specification of 1.0 MPa max and -5 to 70 C applies to all bowl materials, so confirm nylon suits your environment. The semi-auto drain clears condensate on pressure drops, while the manual lever gives you control when needed. The lower-pressure type tops out at 0.4 MPa (20-58 psi), so if your machine may ever need more than that, the standard type is the right part. The PT thread has a gauge scale in MPa/psi, matching most local gauges. The 40 um element is the standard grade; the W option upgrades to 5 um for finer filtration. Spare parts are GAFR200-06 and GAL200-06, both orderable separately. With a 1.0 MPa max supply, you have about 0.6 MPa of headroom above the 0.4 MPa top of this unit's regulated band.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter-regulator first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 590 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR200-06 filter-regulator on that branch instead of the full combination.
Airtac GAFC Air Service Unit GAFC200N06L FAQ
This lower-pressure F.R.L. combination operates from 0.15 to 0.4 MPa (20-58 psi). Max pressure is 1.0 MPa (145 psi) and proof pressure is 1.5 MPa (215 psi). Temperature range is -5 to 70 C. The drain bowl holds 25 cc and the oil bowl holds 36 cc. Use ISO VG 32 oil. The complete unit weighs 590 g.
The N code specifies a nylon bowl. The catalogue does not give separate temperature or chemical data for nylon versus PC - the common specification of 1.0 MPa max and -5 to 70 C applies to both. Confirm the material suits your surroundings, especially if solvents or impacts are present.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFC Air Service Unit GAFC200N06L
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.