Airtac GAFC Air Service Unit GAFC200N06LN
The AirTAC Airtac GAFC Air Service Unit GAFC200N06LN is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
- TypeF.R.L. combination
- Port size1/8"
- Pressure range0.15 - 0.4 MPa (20 - 58 psi)
- Filtering grade40 µm
- Bowl materialNylon
- Drainsemi-auto + manual
- Pressure gaugeNot fitted
- Weight590 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAFC Air Service Unit GAFC200N06LN
This AirTAC GAFC200N06LN is a two-piece F.R.L. combination: a filter-regulator body paired with a lubricator, mounted on a T-bracket with quick clamps. The 1/8in port and 590 g mass suit small jigs, single actuators, or bench fixtures where a full-size train is overkill. The nylon bowl is specified by the N before the port code; the shared specification of 1.0 MPa max pressure and -5 to 70 C applies regardless of bowl material, so confirm the nylon suits your environment.
The lower-pressure regulator tops out at 0.4 MPa (20-58 psi), which is the right band for light-duty cylinders or low-force clamping. A 40 um element handles general workshop air, and the 25 cc condensate bowl plus 36 cc oil bowl define the service interval. The semi-auto drain dumps when pressure drops, while the manual drain gives on-demand control. No gauge is fitted; the 1/8in gauge connection allows a later addition. The lubricator meters ISO VG 32 oil into the air stream after regulation, so the downstream line carries a controlled mist.
Airtac GAFC Air Service Unit GAFC200N06LN Technical Specifications
| Model | Airtac GAFC Air Service Unit GAFC200N06LN |
|---|---|
| Series | GAFC200 F.R.L. combination |
| Port size | 1/8" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 590 g |
Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFC200 is 1/8" if you add one.
Model Code: Airtac GAFC Air Service Unit GAFC200N06LN
| GAFC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAFR200-06 filter & regulator, GAL200-06 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.
Size Class & Flow Envelope
- GAFC2001/8"-1/4" · 1750 L/min
- GAFC3001/4"-1/2" · 3500 L/min
- GAFC4003/8"-1/2" · 6000 L/min
- GAFC5003/4" · 7000 L/min
- GAFC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFC200 · 1/8" · curve to 1750 L/min |
|---|---|
| One size up | GAFC300 (curve to 3500 L/min) |
| Build order | Filter & regulator → bracket → lubricator |
Where the Airtac GAFC Air Service Unit GAFC200N06LN Is Used
Small jig clamping
Feed a single pneumatic clamp on a benchtop assembly jig. The 1/8in port and 590 g weight mount directly to the fixture frame, and the lower-pressure range protects delicate workpieces from over-force.
Lab air bench
Supply a small laboratory fixture or test rig that needs clean, regulated air at modest pressure. The 40 um element removes particulates, and the lubricator adds ISO VG 32 oil for a downstream air cylinder.
Single actuator station
Run one air cylinder on a packaging or sorting station. The two-piece build reduces rail space versus a three-body train, and the semi-auto drain clears condensate on each pressure drop.
Is the Airtac GAFC Air Service Unit GAFC200N06LN the Right Air-Prep Unit?
Choose the GAFC200 body for 1/8in ports and light flow; the catalogue flow curve is plotted to 1750 L/min at 0.7 MPa inlet, which is a sizing envelope rather than a rated capacity. The N bowl code specifies nylon, and the shared specification does not change with material, so verify nylon suits your surroundings. The blank drain code means both semi-auto and manual drains are fitted; the A option swaps to automatic. The L type sets the 0.15-0.4 MPa (20-58 psi) band, and if the machine may ever need more than 0.4 MPa, the standard S type is the correct choice. The N after the port means no gauge is supplied; the 1/8in connection allows one to be added. The PT thread carries an MPa/psi scale if a gauge is fitted later. The 40 um element is standard; W upgrades to 5 um for finer filtration. Spares are the GAFR200-06 filter-regulator and GAL200-06 lubricator, both orderable separately. The 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range, so plan the supply pressure accordingly.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter-regulator first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 590 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR200-06 filter-regulator on that branch instead of the full combination.
Airtac GAFC Air Service Unit GAFC200N06LN FAQ
The GAFC200N06LN operates at 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). Temperature range is -5 to 70 C. The drain bowl holds 25 cc and the oil bowl holds 36 cc. Recommended lubricant is ISO VG 32. The unit weighs 590 g and has a 1/8in port.
The N after the port code means no gauge is supplied. The GAFC200 body has a 1/8in gauge connection, so you can add a compatible gauge if you need to read the set pressure. Without one, the regulated output cannot be visually verified.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFC Air Service Unit GAFC200N06LN
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.