Airtac GAFC Air Service Unit GAFC200N06LNW
The AirTAC Airtac GAFC Air Service Unit GAFC200N06LNW is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
- TypeF.R.L. combination
- Port size1/8"
- Pressure range0.15 - 0.4 MPa (20 - 58 psi)
- Filtering grade5 µm
- Bowl materialNylon
- Drainsemi-auto + manual
- Pressure gaugeNot fitted
- Weight590 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAFC Air Service Unit GAFC200N06LNW
This AirTAC GAFC200N06LNW is a compact F.R.L. combination that pairs a filter-regulator body with a lubricator on a shared T-bracket, so you get filtration, pressure control and oil misting from just two mounted pieces. It is built for a 1/8in port, weighs 590 g, and regulates from 0.15 to 0.4 MPa (20-58 psi), with the 5 um element trapping fine particles before the air reaches the lubricator.
The nylon bowl holds 25 cc of condensate, while the separate oil bowl holds 36 cc, and the semi-auto drain dumps water whenever pressure drops, with a manual backup for on-demand use. No gauge is fitted, so the 1/8in gauge connection is left open for an accessory if you need to read the setpoint, and the unit must not freeze, keeping it to -5 to 70 C environments.
Airtac GAFC Air Service Unit GAFC200N06LNW Technical Specifications
| Model | Airtac GAFC Air Service Unit GAFC200N06LNW |
|---|---|
| Series | GAFC200 F.R.L. combination |
| Port size | 1/8" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 590 g |
Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFC200 is 1/8" if you add one.
Model Code: Airtac GAFC Air Service Unit GAFC200N06LNW
| GAFC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAFR200-06 filter & regulator, GAL200-06 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.
Size Class & Flow Envelope
- GAFC2001/8"-1/4" · 1750 L/min
- GAFC3001/4"-1/2" · 3500 L/min
- GAFC4003/8"-1/2" · 6000 L/min
- GAFC5003/4" · 7000 L/min
- GAFC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFC200 · 1/8" · curve to 1750 L/min |
|---|---|
| One size up | GAFC300 (curve to 3500 L/min) |
| Build order | Filter & regulator → bracket → lubricator |
Where the Airtac GAFC Air Service Unit GAFC200N06LNW Is Used
Precision Fixture Clamping
Feed a small bench-top jig or a single pneumatic clamp on an assembly station, where the lower 0.4 MPa ceiling protects delicate workpieces from over-force.
Lab Air Supply
Supply a compact laboratory test rig or a small leak-tester that runs on instrument air, using the 5 um element to keep fine particles away from sensitive orifices.
Maintenance Workstation
Power a portable maintenance cart with a single small cylinder or air tool, where the 590 g weight and 1/8in port keep the setup light and easy to move.
Is the Airtac GAFC Air Service Unit GAFC200N06LNW the Right Air-Prep Unit?
Choose this GAFC200N06LNW when your circuit runs on 1/8in ports and needs a lower pressure band, since the L type tops out at 0.4 MPa (58 psi) rather than the standard 0.9 MPa. The nylon bowl is a build choice, but the shared 1.0 MPa maximum and -5 to 70 C range apply to all bowl materials, so confirm it suits your surroundings; the 5 um element suits finer filtration but will need more frequent service than a 40 um unit. The semi-auto and manual drains are both fitted, and the PT thread carries a gauge scale in MPa and psi if you add a gauge later. Spare parts are the GAFR200-06 filter-regulator and GAL200-06 lubricator, both orderable separately. Since the lubricator adds oil mist, choose a plain GAFR filter-regulator if the line must stay oil-free. The 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range, so plan your inlet pressure accordingly.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter-regulator first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 590 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR200-06 filter-regulator on that branch instead of the full combination.
Airtac GAFC Air Service Unit GAFC200N06LNW FAQ
This F.R.L. combination operates from 0.15 to 0.4 MPa (20-58 psi), with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It works in temperatures from -5 to 70 C and uses ISO VG 32 oil in the lubricator. The drain bowl holds 25 cc and the oil bowl holds 36 cc, with a total weight of 590 g.
The N after the port code means no gauge is supplied, so you cannot read the set pressure directly on the unit. The GAFC200 body has a 1/8in gauge connection, so you can add a separate pressure gauge there if you need to monitor or adjust the outlet pressure visually.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFC Air Service Unit GAFC200N06LNW
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.