Airtac GAFC Air Service Unit GAFC200N06SN
The AirTAC Airtac GAFC Air Service Unit GAFC200N06SN is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination
- Port size1/8"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- Bowl materialNylon
- Drainsemi-auto + manual
- Pressure gaugeNot fitted
- Weight590 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAFC Air Service Unit GAFC200N06SN
This AirTAC GAFC200N06SN is a compact F.R.L. combination built from two units on a single T-bracket: the filter and regulator share one body, and the lubricator adds a metered oil mist last, downstream of the pressure setting. With a 1/8" port and a 590 g mass, it suits small jigs, single actuators, or a short feed line where space is tight and the air demand is modest.
The standard pressure range is 0.15-0.9 MPa (20-130 psi), with a 40 um element filtering the supply. The nylon bowl is specified by the N before the port code; the catalogue gives no material-specific temperature or impact data, so confirm it suits your environment. No gauge is supplied, so the set pressure cannot be read without adding one to the 1/8" gauge connection.
Airtac GAFC Air Service Unit GAFC200N06SN Technical Specifications
| Model | Airtac GAFC Air Service Unit GAFC200N06SN |
|---|---|
| Series | GAFC200 F.R.L. combination |
| Port size | 1/8" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 590 g |
Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFC200 is 1/8" if you add one.
Model Code: Airtac GAFC Air Service Unit GAFC200N06SN
| GAFC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAFR200-06 filter & regulator, GAL200-06 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.
Size Class & Flow Envelope
- GAFC2001/8"-1/4" · 1750 L/min
- GAFC3001/4"-1/2" · 3500 L/min
- GAFC4003/8"-1/2" · 6000 L/min
- GAFC5003/4" · 7000 L/min
- GAFC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFC200 · 1/8" · curve to 1750 L/min |
|---|---|
| One size up | GAFC300 (curve to 3500 L/min) |
| Build order | Filter & regulator → bracket → lubricator |
Where the Airtac GAFC Air Service Unit GAFC200N06SN Is Used
Bench-mounted jig
Feed a single pneumatic clamp or a small bench press with filtered, regulated, lubricated air at 1/8" porting, where the 590 g weight is easily supported by a frame.
Instrument air prep
Protect a precision regulator or a sensitive valve on a lab rig with the 40 um element, keeping solids and moisture out of the control path.
Prototype test stand
Set up a quick test loop for a single cylinder or a small rotary actuator, using the semi-auto drain to clear condensate between test runs.
Is the Airtac GAFC Air Service Unit GAFC200N06SN the Right Air-Prep Unit?
Choose the GAFC200 body for 1/8" porting and a 25 cc condensate bowl with a 36 cc oil bowl, giving a service interval suited to light duty. The nylon bowl is a build choice, not a performance upgrade, so confirm compatibility with your surroundings. The drain is the standard pair: a semi-auto drain that dumps on pressure drop plus a manual drain for on-demand use. The 40 um element handles general workshop air, while the W option would fit a 5 um element for finer filtration. The PT thread carries a gauge scale in MPa and psi, though this model ships without a gauge. If the line must stay oil-free, omit the lubricator and choose a plain GAFR filter-regulator instead. The two units are orderable separately as GAFR200-06 and GAL200-06. With a 1.0 MPa max supply, there is only about 0.1 MPa of headroom above the 0.9 MPa top of the regulated range, so plan the supply pressure accordingly.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter-regulator first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 590 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR200-06 filter-regulator on that branch instead of the full combination.
Airtac GAFC Air Service Unit GAFC200N06SN FAQ
The GAFC200N06SN operates at 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It is rated for -5 to 70 C and must not freeze. The drain bowl holds 25 cc and the oil bowl holds 36 cc. Use ISO VG 32 lubricant. The complete unit weighs 590 g.
The N before the port code specifies a nylon bowl, a material choice that does not change the shared specification. The N after the port code means no gauge is supplied, leaving the 1/8" gauge connection open for a gauge you add later. The semi-auto and manual drains are both fitted, so condensate can be dumped automatically on pressure drop or manually on demand.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFC Air Service Unit GAFC200N06SN
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.