Airtac GAR Air Regulator GAR60025S
The AirTAC Airtac GAR Air Regulator GAR60025S is a genuine compressed-air pressure regulator. It sets and holds a steady downstream pressure across the 0.05 - 0.9 MPa range, with 1" ports and a built-in circular pressure gauge. It regulates pressure only — it does not filter the air or remove water.
- TypeAir regulator
- Port size1"
- Pressure range0.05 - 0.9 MPa
- RegulationStandard
- GaugeCircular
- Reflux valveNo
- Max pressure1.0 MPa
- Weight1390 g
About the Airtac GAR Air Regulator GAR60025S
The GAR60025S is a heavy-duty air pressure regulator that takes a variable supply and holds a steady downstream pressure you set with the knob. It does not filter or clean the air, and it has no drain bowl or filter element. This unit carries a 1 inch port and weighs 1390 g, placing it at the top of the GAR size range for high-demand lines.
The pressed-in self-locking knob prevents the setpoint from drifting when the machine vibrates, so a calibrated pressure stays put during a shift. The circular gauge with clip and magnifier is fitted and reads MPa/psi, saving panel space while keeping the setpoint visible. The balanced adjustment design helps the regulator hold its setting as the supply pressure fluctuates.
Airtac GAR Air Regulator GAR60025S Technical Specifications
| Model | Airtac GAR Air Regulator GAR60025S |
|---|---|
| Series | GAR600 air regulator |
| Port size | 1" (PT thread) |
| Regulation type | Standard |
| Pressure range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure gauge | Circular, MPa / psi scale |
| Bracket | Included |
| Reflux valve | None |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -20 to +70 °C |
| Adjustment | Self-locking press-in knob |
| Mounting | Panel + optional bracket |
| Weight | 1390 g |
Specifications follow the official AirTAC GAR catalogue (pages 228-229). This is a regulator only — it sets and holds a downstream pressure but does not filter the air or separate water. To clean the air as well, use the matching GAFR600 filter-regulator or add a GAF filter upstream. Never run above the 1.5 MPa (215 psi) proof pressure.
Model Code: Airtac GAR Air Regulator GAR60025S
| GAR600 | GA600 series air regulator — sets the port range and weight class. |
|---|---|
| 25 | Port size 1". This body offers 20 = 3/4", 25 = 1". |
| S | Standard regulation: 0.05 - 0.9 MPa (7 - 130 psi). This body offers S (standard) only. |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow (reflux) valve. |
A GAR regulates pressure but does not filter — there is no bowl, element or drain code. Need to clean the air too? The matching GAFR600-25 is the same regulator with a built-in filter.
Size Class
- GAR2001/8"-1/4" · 170 g
- GAR3001/4"-1/2" · 300 g
- GAR4003/8"-1/2" · 570 g
- GAR5003/4" · 580 g
- GAR6003/4"-1" · 1390 g
All bodies share the same 0.05-0.9 MPa (S) regulated range, 1.0 MPa max and 1.5 MPa proof; the body number sets the port size and the flow the regulator can pass. Bigger ports feed higher air demand. The catalogue plots a flow curve at 0.7 MPa inlet but prints no numeric envelope, so size by port and weight and confirm the curve for a real duty point.
| This model | GAR600 · 1" · 1390 g |
|---|---|
| One size down | GAR500 |
| Add filtration | GAFR600-25 (filter + regulator) |
Where the Airtac GAR Air Regulator GAR60025S Is Used
Machine header supply
Set the pressure for a whole machine header feeding multiple pneumatic actuators. The 1 inch port and 1390 g body handle the higher air demand without relying on tubing for support.
Multi-station assembly line
Hold a stable downstream pressure for several workstations on an assembly line, so each tool sees the same supply even when upstream pressure varies.
Conveyor tensioning system
Regulate the air feeding a conveyor belt tensioning system. The self-locking knob keeps the setpoint from drifting due to vibration from the moving belt.
Is the Airtac GAR Air Regulator GAR60025S the Right Regulator?
Choose the GAR60025S when your line needs a 1 inch port and the full standard regulated range of 0.05-0.9 MPa (7-130 psi). The mounting bracket is included, and the circular gauge is fitted with an MPa/psi scale for PT threads. This is the largest GAR body, so it suits a machine header or a multi-station line rather than a single small tool. If the air also needs cleaning, pair it with a GAF filter upstream or use the matching GAFR60025S filter-regulator instead. The standard type's adjustable band is about 2.4x the width of the lower-pressure L type (0.85 MPa vs 0.35 MPa), giving you a wider range of setpoints.
Quick checklist
- ✓ Body size for your air demand (1" here)
- ✓ Type S (0.05-0.9) or L (0.05-0.4 MPa)
- ✓ Gauge fitted, or no gauge (N)
- ✓ Thread PT / G / NPT (sets gauge scale)
- ✓ Bracket kept or removed (J)
- ✓ Need filtration too? Use GAFR600
Installation & Setting Notes
- check Install with the airflow arrow: IN to OUT, knob accessible.
- check Put a filter (GAF or a GAFR) UPSTREAM — a regulator does not clean the air.
- check Set pressure by turning the knob up to the target, then press it in to lock.
- check Keep supply at or below the 1.0 MPa (145 psi) max working pressure.
- check Never exceed the 1.5 MPa (215 psi) proof pressure.
- check Support the 1390 g unit on its panel or bracket, not on the tubing.
This is a regulator only — it sets and holds pressure but does not filter or lubricate. Add a GAF filter, a GAL lubricator, or step up to the GAFR600-25 filter-regulator as your air-prep needs grow.
Airtac GAR Air Regulator GAR60025S FAQ
The GAR60025S is a standard-type air pressure regulator with a 1 inch port and a weight of 1390 g. It regulates from 0.05 to 0.9 MPa (7-130 psi), with a max supply pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The operating temperature range is -20 to 70 C. It has a circular gauge fitted and includes a mounting bracket.
No. The GAR60025S is a regulator only. It does not filter, clean, or dry the air, and it has no drain bowl or filter element. If you need clean air, install a GAF filter upstream or choose the GAFR60025S filter-regulator, which combines both functions in one body.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAR Air Regulator GAR60025S
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.