Airtac JSID Double Rod Cylinder JSID100X175S
The AirTAC Airtac JSID Double Rod Cylinder JSID100X175S is a genuine double acting, double rod JIS-standard air cylinder with a Ø100mm bore and 175mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke175 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID100X175S
Delivering 3574 N of thrust in both directions at 0.5 MPa, this double-rod JIS profile cylinder uses a single piston with a rod exiting each end to ensure perfectly symmetric force. The extruded hard-anodized aluminium barrel keeps the unit more compact and shorter than a same-bore ISO 15552 cylinder. Because the rod passes through both covers, the effective area is identical on the extend and retract strokes, providing excellent anti-rotation stability for guided loads.
This 100 mm bore variant features a G1/2 air port, an M26x1.5 rod thread, and adjustable 33 mm air cushions at each end to tame end-of-stroke impacts. The built-in piston magnet (-S) allows CMSE or DMSE switches to drop directly into the side grooves for position sensing. Based on the 0.5 MPa output, you get a safe working load of about 2144 N, which translates to lifting roughly 182 kg vertically with a 2:1 safety margin.
Airtac JSID Double Rod Cylinder JSID100X175S Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID100X175S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 801 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID100X175S
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID100X175S Is Used
Twin-Spindle Machining
Drives two opposing machining heads simultaneously from both rod ends, ensuring perfectly synchronized cutting cycles without torsional deflection.
Symmetric Transfer Arm
Moves a heavy workpiece across a belt line using equal push and pull force, preventing rotational sag during high-speed part handoff.
Guided Vertical Lift
Lifts roughly 182 kg of palletized stock vertically, relying on the dual rods to maintain parallel alignment and resist twisting under offset loads.
Is the Airtac JSID Double Rod Cylinder JSID100X175S the Right Cylinder?
When sizing this double-acting unit, the neighbouring 80 mm bore provides 2268 N each way, while the larger 125 mm bore offers 5734 N at 0.5 MPa, making the 100 mm an ideal middle ground for heavy-duty tasks. Choose a double-rod configuration when your application demands anti-twist guidance, twin tooling driven from both ends, a symmetric load path, or a rear-mounted sensor cam. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2. The -S suffix ensures you have the magnet required for CMSE/DMSE sensing. For this 175 mm stroke, ensure external load guides are used to prevent excessive side-loading on the rod seals.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID100X175S FAQ
The force is equal in both directions due to the double-rod design: 3574 N at 0.5 MPa and 5003 N at 0.7 MPa, with a theoretical max of 729 kgf at 1.0 MPa. It operates at 0.15-1.0 MPa, runs at 30-800 mm/s, and uses a G1/2 port.
The -S indicates a built-in magnet for CMSE/DMSE position switches, not a load-holding lock. A plain cylinder drifts on air loss and the air cushion only decelerates near stroke end. To hold a load securely, add an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID100X175S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.