Airtac JSID Double Rod Cylinder JSID100X400
The AirTAC Airtac JSID Double Rod Cylinder JSID100X400 is a genuine double acting, double rod JIS-standard air cylinder with a Ø100mm bore and 400mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke400 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID100X400
Delivering 3574 N of thrust in both directions at 0.5 MPa, this 100 mm bore double-rod actuator uses its rod-side area on both faces for perfectly symmetric push and pull power. The twin rods exit both ends to prevent mechanical twist under heavy offset loads, while the hard-anodized aluminum profile barrel keeps the total envelope shorter than a same-bore ISO 15552 unit. It breathes through a G1/2 port and features adjustable 33 mm air cushions at each end to tame deceleration.
Because the piston sees equal pressure area both ways, you get identical 5003 N output at 0.7 MPa and a 729 kgf ceiling at 1.0 MPa. This translates to a safe working load of roughly 2144 N, meaning you can vertically lift about 182 kg with a 2:1 safety margin. As a plain SKU without a magnet, it cannot host CMSE or DMSE sensors, and the cushions only slow the piston near stroke end rather than locking it, so fit an external rod lock or pilot-operated check valve if you need to hold a load on air loss.
Airtac JSID Double Rod Cylinder JSID100X400 Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID100X400 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 400 mm |
| Acting type | Double acting, double rod |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 801 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID100X400
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID100X400 Is Used
Twin-Spindle Machining
Drives two opposing machining heads simultaneously from one symmetric piston, ensuring parallel cutting strokes without rotational twist.
Dual-End Transfer Pusher
Uses the rod extending from the rear cover to push a part onto an outbound conveyor while the front rod retracts a new blank into the work zone.
Symmetric Lift Platform
Lifts roughly 182 kg of vertical load with a 2:1 margin, using the equal both-ways force to maintain a stable, level platform without drift asymmetry.
Is the Airtac JSID Double Rod Cylinder JSID100X400 the Right Cylinder?
Sizing this 100 mm bore actuator requires looking both ways: step down to an 80 mm bore for 2268 N equal force, or jump up to a 125 mm bore for 5734 N if your 400 mm stroke needs more muscle. A double-rod design is the right call when you need anti-rotation guidance, want to drive twin tooling from one piston, require a symmetric load path, or need a cam out the back end for tracking. You can mount it via FA, LB, TC, TCM1, or TCM2 brackets. Since this is a non-magnet SKU, you cannot add position sensing; choose the -S variant for CMSE/DMSE switches. Finally, with a 400 mm stroke, always support the load with external guides to prevent rod bending and excessive side loading.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID100X400 FAQ
Because it is a double-rod cylinder, force is equal in both directions using the rod-side area. It outputs 3574 N at 0.5 MPa and 5003 N at 0.7 MPa, with a theoretical maximum of 729 kgf at 1.0 MPa. Operating pressure ranges from 0.15 to 1.0 MPa, it uses a G1/2 port, and the rod thread is M26x1.5.
No, this plain SKU lacks a magnet and cannot host CMSE or DMSE sensors; you need the -S variant for position detection. Additionally, the adjustable 33 mm cushions only decelerate the piston near stroke end and will not hold a load on air loss. For suspended loads, install an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID100X400
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.