Airtac JSID Double Rod Cylinder JSID100X500S
The AirTAC Airtac JSID Double Rod Cylinder JSID100X500S is a genuine double acting, double rod JIS-standard air cylinder with a Ø100mm bore and 500mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke500 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID100X500S
Delivering 3574 N of thrust in both directions at 0.5 MPa, this double-acting profile cylinder uses a single piston with a rod exiting both ends. The symmetric layout prevents rotation and provides a stable load path. It yields a safe working load of about 2144 N, which translates to lifting roughly 182 kg vertically with a 2:1 margin. Built to JIS standards, the hard-anodized aluminum body is significantly shorter than a same-bore ISO 15552 unit.
This 100 mm bore variant features a 500 mm stroke, a 32 mm rod, and a G1/2 port. The -S suffix denotes a built-in piston magnet for CMSE/DMSE switches that mount directly into the side grooves. Adjustable 33 mm air cushions at both ends absorb kinetic energy near stroke end, though a plain cylinder drifts on air loss, so fit an external rod lock for held loads.
Airtac JSID Double Rod Cylinder JSID100X500S Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID100X500S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 500 mm |
| Acting type | Double acting, double rod |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 801 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID100X500S
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID100X500S Is Used
Twin-Spindle Machining
Drives two opposing machining heads simultaneously using both rod ends, ensuring perfectly synchronized cutting cycles.
Symmetric Diverting Gate
Pushes a diverter blade from either side without twisting, keeping product flow aligned across the belt width.
Vertical Lift Platform
Lifts loads up to 182 kg with a 2:1 safety margin, using the equal both-ways force to raise and lower smoothly.
Is the Airtac JSID Double Rod Cylinder JSID100X500S the Right Cylinder?
Flanking this 100 mm bore are the 80 mm (2268 N) and 125 mm (5734 N) sizes, both delivering equal push and pull forces at 0.5 MPa. Choose a double-rod design when your mechanism demands anti-rotation guidance, twin tooling operation from one actuator, or a sensor cam at the back end. Mounting options include FA, LB, TC, TCM1, and TCM2. Because the 500 mm stroke generates leverage, always support the load with external guides to prevent rod bending and premature seal wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID100X500S FAQ
Force is equal both ways: 3574 N at 0.5 MPa, 5003 N at 0.7 MPa, and a theoretical max of 729 kgf at 1.0 MPa. It operates at 0.15-1.0 MPa, runs at 30-800 mm/s, and uses a G1/2 port with a 32 mm rod.
The -S indicates a built-in piston magnet. This allows CMSE or DMSE reed and electronic switches to drop into the side barrel grooves for precise position detection at either end of the 500 mm stroke.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID100X500S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.