Airtac JSID Double Rod Cylinder JSID100X600S
The AirTAC Airtac JSID Double Rod Cylinder JSID100X600S is a genuine double acting, double rod JIS-standard air cylinder with a Ø100mm bore and 600mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke600 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID100X600S
Delivering 3574 N of thrust in both directions at 0.5 MPa, this double-rod JIS profile cylinder uses a single piston with a rod exiting each end. The symmetric layout prevents rotation and provides a stable load path, while the extruded hard-anodized aluminum barrel keeps the unit more compact than a same-bore ISO 15552 cylinder. A G1/2 port feeds the 100 mm bore, and the integrated -S magnet allows CMSE/DMSE sensors to drop directly into the side grooves.
With a 600 mm stroke, the twin rods can drive two tools simultaneously or carry a sensor cam at the back end. The 3574 N output at 0.5 MPa translates to a safe working load of about 2144 N, which is enough to vertically lift roughly 182 kg with a 2:1 safety margin. Adjustable 33 mm air cushions at both ends decelerate the piston smoothly, though an external rod lock or pilot-operated check valve is required to hold a load securely on air loss.
Airtac JSID Double Rod Cylinder JSID100X600S Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID100X600S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting, double rod |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 801 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID100X600S
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID100X600S Is Used
Twin-Spindle Lifting
Drives two parallel lifting platens simultaneously using both rod ends, keeping heavy workpieces balanced and preventing twist during vertical transfer.
Symmetric Diverting Gate
Pushes a diverter blade from either end to reroute large cartons on a high-speed line, ensuring the gate stays perfectly aligned without rotational drift.
Dual-End Pallet Stopper
Uses the rear rod extension to trigger a return sensor cam while the front rod halts incoming pallets, combining stopping force and position feedback in one motion.
Is the Airtac JSID Double Rod Cylinder JSID100X600S the Right Cylinder?
When sizing this 100 mm bore, stepping down to an 80 mm bore yields 2268 N of equal force at 0.5 MPa, while stepping up to a 125 mm bore provides 5734 N. The double-rod layout is the right call when you need anti-rotation guidance, symmetric load distribution, or twin tooling driven from one piston. Mounting options include FA, LB, TC, TCM1, and TCM2 brackets. The -S suffix confirms the piston magnet is present for CMSE/DMSE switches. Because the stroke is 600 mm, external guides are strongly recommended to prevent rod bending under side loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID100X600S FAQ
Because the rod passes through both covers, force is equal in both directions. It generates 3574 N at 0.5 MPa and 5003 N at 0.7 MPa. The theoretical maximum pull force is 729 kgf at 1.0 MPa. The bore uses a G1/2 port.
The twin rods create a symmetric load path that resists torsional rotation, allowing you to drive two tools from one piston or mount a rear sensor cam. The -S suffix means the cylinder has a built-in magnet for CMSE/DMSE switches that mount directly into the profile grooves.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID100X600S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.