Airtac JSID Double Rod Cylinder JSID100X700S
The AirTAC Airtac JSID Double Rod Cylinder JSID100X700S is a genuine double acting, double rod JIS-standard air cylinder with a Ø100mm bore and 700mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke700 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID100X700S
Delivering 3574 N of thrust in both directions at 0.5 MPa, this 100 mm bore double-rod actuator uses a single piston with a rod exiting each cover. Because the pressure area is identical on both faces, push and pull forces remain perfectly equal at 3574 N @0.5 MPa and 5003 N @0.7 MPa. The G1/2 port feeds the chambers efficiently, while the hard-anodized aluminum profile barrel keeps the overall body shorter than an ISO 15552 cylinder of the same bore.
The twin rods create a symmetric load path that resists torsional twist, making the actuator ideal for driving two tools simultaneously or mounting a rear sensor cam. With a safe working load around 2144 N, it can vertically lift roughly 182 kg with a 2:1 safety margin. The -S suffix indicates a built-in piston magnet for drop-in CMSE/DMSE switches, and adjustable 33 mm air cushions decelerate the 700 mm stroke smoothly.
Airtac JSID Double Rod Cylinder JSID100X700S Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID100X700S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 700 mm |
| Acting type | Double acting, double rod |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 801 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID100X700S
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID100X700S Is Used
Dual-Station Transfer
Uses both rod ends to push and retract identical workpieces on parallel conveyor lanes simultaneously without twisting.
Symmetric Vertical Press
Provides balanced downward force with a rod out each end, maintaining precise vertical alignment during pressing.
Cam-Actuated Sorting
Uses the rear rod extension to trigger external mechanical switches while the front rod diverts packages.
Is the Airtac JSID Double Rod Cylinder JSID100X700S the Right Cylinder?
When sizing this 100 mm bore, step down to the 80 mm option for 2268 N equal force, or step up to the 125 mm bore for 5734 N if your application requires heavier drive power. A double-rod design is the right call when you need anti-rotation guidance, twin tooling on one axis, or a symmetric load path to prevent rod sag. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2 brackets. The -S magnet enables CMSE/DMSE position sensing. Because the 700 mm stroke is long, always support the load with external guides to prevent rod bending and excessive side loading.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID100X700S FAQ
Force is equal in both directions due to the double-rod design: 3574 N at 0.5 MPa and 5003 N at 0.7 MPa, with a theoretical maximum of 729 kgf at 1.0 MPa. The air port size is G1/2.
No, a plain cylinder drifts when air is lost or the valve is centered. The adjustable 33 mm cushions only decelerate the piston near stroke end and do not act as a brake. For load holding, install an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID100X700S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.