Airtac JSID Double Rod Cylinder JSID100X800S
The AirTAC Airtac JSID Double Rod Cylinder JSID100X800S is a genuine double acting, double rod JIS-standard air cylinder with a Ø100mm bore and 800mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke800 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID100X800S
Delivering 3574 N of thrust in both directions at 0.5 MPa, this large-bore JIS profile cylinder uses a twin-rod piston to ensure perfectly symmetric output. The hard-anodized aluminum extrusion makes it shorter and more compact than a same-bore ISO 15552 unit. It carries a safe working load of roughly 2144 N, which translates to lifting about 182 kg vertically with a 2:1 margin.
A rod extends from each end, preventing rotation and allowing you to mount twin tooling or a rear sensor cam. The -S suffix means a built-in magnet for CMSE/DMSE switches in the side grooves. Air connects via a G1/2 port, and adjustable 33 mm cushions absorb impact at stroke ends.
Airtac JSID Double Rod Cylinder JSID100X800S Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID100X800S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 800 mm |
| Acting type | Double acting, double rod |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 801 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID100X800S
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID100X800S Is Used
Twin-Tool Stamping
Drives two forming tools simultaneously from opposite rod ends, keeping heavy press forces perfectly balanced.
Symmetric Diverting
Pushes a diverter arm from the rear while the front rod carries a cam for position feedback.
Anti-Rotation Lifting
Raises heavy palletized loads vertically without twisting, using the dual-rod geometry for stable guidance.
Is the Airtac JSID Double Rod Cylinder JSID100X800S the Right Cylinder?
This 100 mm bore provides 3574 N equal force each way; step down to an 80 mm bore for 2268 N, or up to a 125 mm bore for 5734 N. Choose the double-rod layout when your mechanism needs anti-rotation guidance, a symmetric load path, or dual-end actuation. Mounting options include FA, LB, TC, TCM1, and TCM2. Because the stroke is 800 mm, always use external guides to prevent rod bending under side loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID100X800S FAQ
Because the rod passes through both covers, force is equal in both directions: 3574 N at 0.5 MPa and 5003 N at 0.7 MPa. The theoretical maximum is 729 kgf at 1.0 MPa. It operates at 30-800 mm/s and uses a G1/2 port.
The -S magnet works with CMSE/DMSE sensors for position detection, and the 33 mm adjustable cushions only decelerate the piston near stroke ends. The cylinder will drift without live air, so use an external rod lock or pilot-operated check valve to hold a load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID100X800S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.