Airtac JSID Double Rod Cylinder JSID100X80S
The AirTAC Airtac JSID Double Rod Cylinder JSID100X80S is a genuine double acting, double rod JIS-standard air cylinder with a Ø100mm bore and 80mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke80 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID100X80S
Delivering 3574 N of thrust in both directions at 0.5 MPa, this AirTAC double-rod actuator uses a single piston with a rod exiting each cover to balance the load path. The G1/2 ported body carries a 32 mm rod and adjustable 33 mm cushions at both ends. Because the effective area is identical on each face, push and pull forces match exactly at 5003 N when running at 0.7 MPa.
Built to JIS dimensions with a hard-anodized extruded aluminum barrel, the housing is notably shorter than an ISO 15552 cylinder of the same 100 mm bore. The -S suffix adds a piston magnet for CMSE or DMSE switches that mount directly into the side grooves. Factoring a 60 percent safety margin, this bore is good for about 2144 N of real work, which translates to safely lifting roughly 182 kg vertically.
Airtac JSID Double Rod Cylinder JSID100X80S Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID100X80S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 801 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID100X80S
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID100X80S Is Used
Twin-Spindle Drilling
Drives two opposing machining heads simultaneously, using the symmetric push and pull force to maintain perfectly balanced cutting pressure on both sides of a workpiece.
Dual-End Transfer Pusher
Uses the rod extending from the rear cover to trip a mechanical valve or sensor cam while the front rod pushes the payload onto a parallel conveyor line.
Vertical Lift Platform
Raises and lowers a 180 kg materials tray with equal force both ways, relying on the non-rotating stability of the dual-rod design to prevent platform twist.
Is the Airtac JSID Double Rod Cylinder JSID100X80S the Right Cylinder?
Sizing this actuator requires looking both ways: stepping down to the 80 mm bore drops the equal force to 2268 N at 0.5 MPa, while the 125 mm bore jumps to 5734 N. Choose the double-rod configuration when a job demands anti-rotation stability, symmetric load distribution, or the ability to drive twin tooling stations simultaneously. Mounting options include FA, LB, TC, TCM1, and TCM2 brackets. The -S magnet enables precise end-of-stroke sensing via CMSE or DMSE switches. For any application exceeding 300 mm of stroke, always incorporate an external guide to prevent side-load damage to the seals.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID100X80S FAQ
This 100 mm bore cylinder features a G1/2 air port and a 32 mm piston rod. Because it is a double-rod design, force is equal in both directions: 3574 N at 0.5 MPa, 5003 N at 0.7 MPa, and a theoretical maximum of 729 kgf at 1.0 MPa.
No, the -S indicates a built-in piston magnet for CMSE or DMSE position switches. The air cushions only decelerate the piston near the end caps; they do not hold a load. If you need to prevent drift on air loss, install an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID100X80S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.