Airtac JSID Double Rod Cylinder JSID100X900
The AirTAC Airtac JSID Double Rod Cylinder JSID100X900 is a genuine double acting, double rod JIS-standard air cylinder with a Ø100mm bore and 900mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke900 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID100X900
Delivering 3574 N of thrust in both directions at 0.5 MPa, this 100 mm bore double-rod actuator uses a single piston with a rod exiting each cover. That symmetric layout prevents rotation and provides a stable load path. The G1/2 ported body is a JIS-standard profile design, making it significantly shorter than an ISO 15552 cylinder of the same bore.
With a 900 mm stroke, you must use external guides to prevent rod bending under side loads. Because this SKU lacks a magnet, it cannot take sensors; add the -S variant for CMSE/DMSE switches. It yields a safe working load of about 2144 N, lifting roughly 182 kg vertically with a 2:1 margin.
Airtac JSID Double Rod Cylinder JSID100X900 Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID100X900 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 900 mm |
| Acting type | Double acting, double rod |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 801 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID100X900
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID100X900 Is Used
Dual-End Transfer Pusher
Drives a product diverter on the front rod while the rear rod simultaneously trips a mechanical cam, keeping both motions perfectly synchronized on a packaging line.
Balanced Vertical Press
Applies 3574 N of equal downward and upward force to seat components, using the twin rods to resist twist and maintain precise vertical alignment during pressing.
Long-Stroke Material Gate
Shifts a heavy 900 mm guard across a machining cell, relying on the hard-anodized profile barrel and external guides to handle the extended stroke safely.
Is the Airtac JSID Double Rod Cylinder JSID100X900 the Right Cylinder?
Sizing spans from the 80 mm bore (2268 N each way) up to the 125 mm bore (5734 N each way). This 100 mm bore hits 3574 N at 0.5 MPa and 5003 N at 0.7 MPa symmetrically. Choose a double rod when you need anti-rotation stability, twin tooling on one axis, or a rear cam for tracking. Mounting options include FA, LB, TC, TCM1, and TCM2. For the 900 mm stroke, always support the load with external linear guides to avoid rod bending. This non-magnet model cannot host a sensor; specify -S for CMSE/DMSE switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID100X900 FAQ
The G1/2 port feeds a 100 mm bore that generates 3574 N at 0.5 MPa and 5003 N at 0.7 MPa. Because it is a double-rod design, these forces are equal in both directions. The theoretical maximum is 729 kgf at 1.0 MPa.
No to both. The adjustable 33 mm cushions only decelerate the piston near the ends; they do not hold load on air loss, so you need an external rod lock or pilot-operated check valve. Also, this specific SKU has no magnet and cannot take sensors—order the -S version for CMSE/DMSE switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID100X900
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.