Airtac JSID Double Rod Cylinder JSID125X100S
The AirTAC Airtac JSID Double Rod Cylinder JSID125X100S is a genuine double acting, double rod JIS-standard air cylinder with a Ø125mm bore and 100mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ125 mm
- Stroke100 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod
- Rod threadM27×2.0
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID125X100S
Delivering 5734 N of thrust in both directions at 0.5 MPa, this double-acting AirTAC cylinder uses a twin-rod design to provide identical push and pull force. The hard-anodized aluminum profile barrel makes it shorter and more compact than a same-bore ISO 15552 unit, while the G1/2 port handles the high air volume needed for the 125 mm bore.
Because the piston rod exits both ends, the unit resists torsional twist and maintains a symmetric load path. The built-in magnet (-S) allows CMSE or DMSE switches to drop directly into the side grooves for precise end-of-stroke detection. Factoring a 60% safety margin, this setup safely handles a 3440 N working load or vertically lifts about 292 kg.
Airtac JSID Double Rod Cylinder JSID125X100S Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID125X100S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø125 mm |
| Stroke | 100 mm |
| Acting type | Double acting, double rod |
| Port size | G1/2 |
| Rod thread | M27×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø125mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 5734 N | 5734 N |
| 0.7 MPa | 8027 N | 8027 N |
| Max (@1.0 MPa) | 1251 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID125X100S
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 125 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID125X100S Is Used
Twin-Spindle Pressing
Drives two opposing forming tools simultaneously with equal 5734 N force, keeping the workpiece centered without torsional deflection.
Symmetric Transfer Unit
Uses the rear rod extension to carry a sensor cam and mirror a pick-and-place motion, ensuring perfectly timed dual-end actuation.
Heavy Vertical Platen
Lowers a 292 kg guided platen smoothly using the 33 mm adjustable air cushions at both ends to absorb the equal bidirectional kinetic energy.
Is the Airtac JSID Double Rod Cylinder JSID125X100S the Right Cylinder?
This 125 mm bore sits at the top of the JSID range, delivering 5734 N each way at 0.5 MPa. If your application needs less force, stepping down to the 100 mm bore yields 3574 N both ways. Choose the double-rod configuration when you need anti-rotation guidance, twin tooling driven from both ends, or a cam for back-end sensing. Mounting options include FA, LB, TC, TCM1, and TCM2. The -S suffix confirms the piston magnet is present for CMSE/DMSE sensors. Even at 100 mm stroke, always support any side loads with an external guide to prevent premature seal wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID125X100S FAQ
Because the rod passes through both covers, force is equal in both directions: 5734 N at 0.5 MPa and 8028 N at 0.7 MPa. The theoretical maximum is 1169 kgf at 1.0 MPa. Operating speed ranges from 30-500 mm/s. It uses a G1/2 port and M27x2.0 rod thread.
No, a standard pneumatic cylinder drifts when air is lost or the valve is centered, as the 33 mm adjustable cushions only decelerate the piston near stroke end rather than locking it. To maintain a vertical position safely, you must add an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID125X100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.