Airtac JSID Double Rod Cylinder JSID32X125
The AirTAC Airtac JSID Double Rod Cylinder JSID32X125 is a genuine double acting, double rod JIS-standard air cylinder with a Ø32mm bore and 125mm stroke, G1/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ32 mm
- Stroke125 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod
- Rod threadM10×1.25
- CushionAdjustable, 20 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID32X125
Delivering 345 N of thrust in both directions at 0.5 MPa, the AirTAC JSID32X125 uses a twin-rod layout on one piston for perfectly symmetric push and pull output. This JIS profile unit is notably shorter than a same-bore ISO 15552 cylinder, saving valuable machine space while retaining a hard-anodized aluminum barrel. The G1/8 port keeps air delivery compact for this 32 mm bore.
Because a shaft exits each end, you gain inherent anti-rotation resistance and can mount a cam or tool on the back side simultaneously. With 345 N available, you have a safe working load of about 207 N, which translates to lifting roughly 18 kg vertically with a 2:1 safety margin. Note this specific SKU lacks a magnet, so it cannot accept CMSE or DMSE sensors without upgrading to the -S variant.
Airtac JSID Double Rod Cylinder JSID32X125 Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID32X125 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 125 mm |
| Acting type | Double acting, double rod |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID32X125
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 32 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID32X125 Is Used
Twin Tool Transfer
Drive a gripper on the front rod and a secondary pusher on the rear rod simultaneously, utilizing the equal 345 N force for synchronized part handling.
Anti-Rotation Guide
Leverage the inherent torsional resistance of the dual shafts to keep a precision pick-and-place head stable without needing extra external linear bearings.
Compact Strip Feed
Fit the short JIS profile body into tight machine cells to index thin material strips, using the adjustable 20 mm cushions to soften the end-of-stroke impact.
Is the Airtac JSID Double Rod Cylinder JSID32X125 the Right Cylinder?
This 32 mm bore sits at the low edge of the JSID range, offering 345 N equal force both ways; stepping up to the 40 mm bore yields 528 N for heavier demands. Choose the double-rod configuration when your application demands anti-twist guidance, symmetric load paths, or twin tooling driven from one cylinder. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2 brackets. For this 125 mm stroke, ensure external load guides are used to prevent side-loading damage. As a non-magnetized model, position sensing is not supported here.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID32X125 FAQ
Because it is a double-rod cylinder, force is equal both ways: 345 N at 0.5 MPa and 483 N at 0.7 MPa, with a theoretical max of 70 kgf at 1.0 MPa. The air port size is G1/8.
No, a plain double-rod cylinder drifts without live air; the adjustable cushions only decelerate the piston near the ends. For vertical load holding, install an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID32X125
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.