Airtac JSID Double Rod Cylinder JSID32X150S
The AirTAC Airtac JSID Double Rod Cylinder JSID32X150S is a genuine double acting, double rod JIS-standard air cylinder with a Ø32mm bore and 150mm stroke, G1/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ32 mm
- Stroke150 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod
- Rod threadM10×1.25
- CushionAdjustable, 20 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID32X150S
Delivering 345 N of equal force in both directions at 0.5 MPa, this 32 mm bore double-rod actuator uses a single piston with a rod exiting each cover. The symmetric layout prevents rotation and provides a stable load path, while the rear rod can drive a secondary tool or trigger a sensor cam. Built on a JIS-standard extruded hard-anodized aluminum profile barrel, it is notably shorter and more compact than a same-bore ISO 15552 cylinder.
At 0.5 MPa the output translates to a safe working load of about 207 N, which is roughly 18 kg lifted vertically with a 2:1 safety margin. This -S variant includes a piston magnet for drop-in CMSE/DMSE switches, uses a G1/8 port, and features adjustable 20 mm air cushions at both ends to decelerate the 150 mm stroke smoothly.
Airtac JSID Double Rod Cylinder JSID32X150S Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID32X150S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID32X150S
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 32 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID32X150S Is Used
Symmetric Transfer
Drives a pick-and-place head from both ends to keep the tool plate perfectly parallel during horizontal part shuttling.
Twin-Tool Machining
Operates two small forming pins simultaneously from opposite cover ends for balanced, high-precision clamping.
Cam-Triggered Sorting
Uses the rear protruding rod as a mechanical cam to trip a limit switch while the front rod actuates a diverter gate.
Is the Airtac JSID Double Rod Cylinder JSID32X150S the Right Cylinder?
For lighter duties the neighboring bores offer different capacities: a 32 mm bore provides 345 N each way at 0.5 MPa, while stepping up to a 40 mm bore yields 528 N. Choose this double-rod configuration when your mechanism requires anti-rotation guidance, twin tooling on opposite sides, or a symmetric load distribution. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2. The -S suffix ensures compatibility with CMSE/DMSE sensors for position feedback. Because the stroke is 150 mm, ensure external guide rails support any significant side loads to prevent binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID32X150S FAQ
Because the rod passes through both covers, force is equal in both directions: 345 N at 0.5 MPa and 483 N at 0.7 MPa. The theoretical maximum is 70 kgf at 1.0 MPa. It features a 32 mm bore, 150 mm stroke, G1/8 port, M10x1.25 rod thread, and adjustable 20 mm cushions.
No, the air cushions only decelerate the piston near the stroke ends and do not lock the load; you need an external rod lock or pilot-operated check valve for holding. The -S suffix indicates a built-in magnet for CMSE/DMSE position switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID32X150S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.