Airtac JSID Double Rod Cylinder JSID32X225S
The AirTAC Airtac JSID Double Rod Cylinder JSID32X225S is a genuine double acting, double rod JIS-standard air cylinder with a Ø32mm bore and 225mm stroke, G1/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ32 mm
- Stroke225 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod
- Rod threadM10×1.25
- CushionAdjustable, 20 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID32X225S
Delivering 345 N of thrust in both directions at 0.5 MPa, the AirTAC JSID32X225S uses a twin-rod layout to provide identical push and pull output. A rod exits both ends of the hard-anodized aluminum profile barrel, yielding a symmetric load path that resists torsional twist. This JIS-standard build is significantly shorter than an equivalent ISO 15552 cylinder of the same 32 mm bore.
The G1/8 port feeds a double-acting chamber running at 30-800 mm/s, while the integrated -S magnet allows CMSE/DMSE sensors to track position from either side. With a safe working load of roughly 207 N, it is well suited for vertically lifting about 18 kg with a 2:1 safety margin. Note that the adjustable 20 mm air cushions only decelerate the piston near the end caps; maintaining a load during air loss requires an external rod lock or pilot-operated check valve.
Airtac JSID Double Rod Cylinder JSID32X225S Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID32X225S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 225 mm |
| Acting type | Double acting, double rod |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID32X225S
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 32 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID32X225S Is Used
Symmetric Transfer
Drives a dual-gripper pick-and-place head from both rod ends, ensuring parallel material handling without rotational drift.
Balanced Vertical Lift
Lifts light 18 kg fixtures vertically with a 2:1 safety margin, using the equal push and pull force to maintain smooth ascent and descent.
Dual-Cam Sensing
Uses the rear extending rod to trigger a CMSE/DMSE switch, confirming full retraction while the front rod actuates the primary tool.
Is the Airtac JSID Double Rod Cylinder JSID32X225S the Right Cylinder?
This 32 mm bore sits at the low edge of the JSID range, offering 345 N equal force both ways at 0.5 MPa. If your application needs slightly more power, the 40 mm bore provides 528 N both ways. Choose the double-rod configuration when you need anti-rotation guidance, symmetric load distribution, twin tooling driven from one piston, or a rear-end sensor cam. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2. The -S suffix means a magnet is installed for CMSE/DMSE switches. Because the 225 mm stroke exceeds 300 mm, ensure external load guidance to prevent side-loading damage.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID32X225S FAQ
The force is equal in both directions due to the double-rod design: 345 N at 0.5 MPa and 483 N at 0.7 MPa. The theoretical maximum is 70 kgf at 1.0 MPa. It uses a G1/8 air port and features a 20 mm adjustable air cushion at each end.
The twin-rod design provides a symmetric load path that resists torsional twist and offers anti-rotation guidance. Having a rod extend from both ends allows you to drive two tools simultaneously or mount a sensor cam on the back side while keeping the main work on the front.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID32X225S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.