Airtac JSID Double Rod Cylinder JSID32X25
The AirTAC Airtac JSID Double Rod Cylinder JSID32X25 is a genuine double acting, double rod JIS-standard air cylinder with a Ø32mm bore and 25mm stroke, G1/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ32 mm
- Stroke25 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod
- Rod threadM10×1.25
- CushionAdjustable, 20 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID32X25
Delivering 345 N of equal force in both directions at 0.5 MPa, this 32 mm bore double-rod actuator uses a G1/8 port and a 12 mm rod. The twin-rod layout creates a symmetric load path that resists torsion, letting you mount a sensor cam or drive two tools from one piston. Its extruded hard-anodized aluminum profile barrel is also shorter than an ISO 15552 cylinder of the same bore.
This JIS-standard unit yields a safe working load of about 207 N, which is roughly 18 kg lifted vertically with a 2:1 margin. The 25 mm stroke operates at 30-800 mm/s with adjustable 20 mm air cushions at each end. Note that this specific SKU lacks a magnet, so it cannot take a CMSE or DMSE sensor without upgrading to the -S variant.
Airtac JSID Double Rod Cylinder JSID32X25 Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID32X25 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Double acting, double rod |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID32X25
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 32 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID32X25 Is Used
Gripper Sync
Drives two opposing mechanical fingers simultaneously from both rod ends for perfectly centered part gripping.
Edge Guide
Uses the twin rods to push a web edge guide from both sides, preventing yaw and keeping material tracking true.
Dual Pick-Place
Carries a pickup tool on the front rod and a sensor cam on the rear rod to trigger the next station in sequence.
Is the Airtac JSID Double Rod Cylinder JSID32X25 the Right Cylinder?
For lighter duties, a smaller bore is unavailable, making this 32 mm the starting point. If you need more push, the 40 mm bore provides 528 N both ways at 0.5 MPa. Choose this double-rod format when your mechanism demands anti-rotation guidance, twin tooling, or a symmetric load path. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2. Because the 25 mm stroke is under 300 mm, side-load guide requirements are minimal. Remember that a plain cylinder drifts on air loss; the cushions only decelerate, so add an external rod lock or pilot-operated check valve to hold a suspended load.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID32X25 FAQ
It features a G1/8 port and generates 345 N of force at 0.5 MPa and 483 N at 0.7 MPa. Because it is a double-rod cylinder, this force is exactly equal in both directions. The theoretical maximum pull force is 70 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet, so it cannot accept CMSE or DMSE reed or solid-state switches. You must select the -S variant of this JIS profile cylinder to enable position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID32X25
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.