Airtac JSID Double Rod Cylinder JSID32X250S
The AirTAC Airtac JSID Double Rod Cylinder JSID32X250S is a genuine double acting, double rod JIS-standard air cylinder with a Ø32mm bore and 250mm stroke, G1/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ32 mm
- Stroke250 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod
- Rod threadM10×1.25
- CushionAdjustable, 20 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID32X250S
Delivering 345 N of thrust in both directions at 0.5 MPa, the AirTAC JSID32X250S uses a twin-rod design to provide identical push and pull force. A rod exits both ends on a single piston, which creates a symmetric load path that resists torsional twist and allows you to drive two separate tools simultaneously. This JIS-standard profile cylinder is notably shorter than an ISO 15552 cylinder of the same bore, saving valuable machine space.
The extruded hard-anodized aluminum barrel keeps the unit lightweight yet rigid, while the built-in magnet (-S) allows CMSE/DMSE sensors to drop directly into the side grooves for precise end-of-stroke detection. With a 32 mm bore and a G1/8 port, it offers a safe working load of about 207 N, which is roughly 18 kg lifted vertically with a 2:1 safety margin. Adjustable air cushions at both ends absorb impact, though an external rod lock is required if you need to hold a load securely during air loss.
Airtac JSID Double Rod Cylinder JSID32X250S Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID32X250S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 250 mm |
| Acting type | Double acting, double rod |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID32X250S
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 32 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID32X250S Is Used
Twin-Tool Transfer
Drives two parallel pick-and-place grippers from opposite rod ends, ensuring perfectly synchronized part handling without adding a second cylinder.
Anti-Rotation Gauging
Uses the symmetric twin-rod load path to hold a measuring head steady, preventing angular deflection during precision thickness checks.
Dual-End Cam Sensing
Leverages the rear protruding rod as a mechanical cam to trigger external limit switches while the internal -S magnet operates CMSE/DMSE sensors.
Is the Airtac JSID Double Rod Cylinder JSID32X250S the Right Cylinder?
This 32 mm bore sits at the compact low edge of the JSID range, offering 345 N both ways; stepping up to the 40 mm bore yields 528 N, while stepping down is not an option as 32 mm is the smallest available size. The double-rod architecture is the right call when your mechanism demands anti-rotation guidance, symmetric load distribution, or a sensor cam on the back end. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2. The included -S magnet supports reed or electronic CMSE/DMSE switches. Because the 250 mm stroke is relatively long for this small bore, ensure you provide adequate external side-load guidance to prevent piston binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID32X250S FAQ
Because the rod passes through both covers, force is equal in both directions: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a theoretical maximum of 70 kgf at 1.0 MPa. The G1/8 ported 32 mm bore operates at speeds from 30-800 mm/s.
No, a standard double-rod cylinder will drift if air is lost or the valve is centered. The adjustable air cushions only decelerate the piston near the stroke ends; they do not lock the position. You must use an external rod lock or a pilot-operated check valve to hold a load securely.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID32X250S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.