Airtac JSID Double Rod Cylinder JSID32X25S
The AirTAC Airtac JSID Double Rod Cylinder JSID32X25S is a genuine double acting, double rod JIS-standard air cylinder with a Ø32mm bore and 25mm stroke, G1/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ32 mm
- Stroke25 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod
- Rod threadM10×1.25
- CushionAdjustable, 20 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID32X25S
Delivering 345 N of equal force in both directions at 0.5 MPa, this 32 mm bore double-rod cylinder uses a single piston with a rod exiting each cover. The symmetrical layout prevents rotation and provides a stable load path, while the hard-anodized aluminum profile barrel keeps the overall body shorter than a same-bore ISO 15552 unit. A G1/8 port supplies air, and the adjustable 20 mm cushions decelerate smoothly at each end.
With the built-in -S magnet, you can drop CMSE or DMSE reed and electronic switches directly into the side grooves for precise position feedback. This bore yields a safe working load of about 207 N, which translates to lifting roughly 18 kg vertically with a 2:1 safety margin. It operates at 30-800 mm/s across a 0.15-1.0 MPa pressure range.
Airtac JSID Double Rod Cylinder JSID32X25S Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID32X25S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Double acting, double rod |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID32X25S
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 32 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID32X25S Is Used
Gripper Synchronization
Drives two opposing mechanical grippers simultaneously from one central piston, ensuring perfectly synchronized part clamping.
Anti-Rotation Pusher
Uses the twin rods to resist twisting moments while pushing small electronic components into a testing fixture.
Dual-End Sensing Cam
Uses the protruding rear rod as a mechanical cam to trigger external limit switches for secondary process validation.
Is the Airtac JSID Double Rod Cylinder JSID32X25S the Right Cylinder?
This 32 mm bore sits at the low edge of the JSID family, offering 345 N each way at 0.5 MPa; stepping up to the 40 mm bore raises that equal force to 528 N. Choose a double-rod configuration when your mechanism demands anti-rotation stability, needs to drive two tools simultaneously, or requires a sensor cam on the back end. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2. The included -S magnet enables CMSE/DMSE sensing. For this 25 mm stroke side-load is minimal, but any stroke over 300 mm requires external guide rails to prevent binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID32X25S FAQ
Because the rod passes through both covers, force is equal in both directions: 345 N at 0.5 MPa and 483 N at 0.7 MPa, with a theoretical max of 70 kgf at 1.0 MPa. The air port is G1/8.
No, a plain double-rod cylinder drifts without live air, as the adjustable 20 mm cushions only decelerate near stroke end. To hold a load vertically, install an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID32X25S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.