Airtac JSID Double Rod Cylinder JSID32X450
The AirTAC Airtac JSID Double Rod Cylinder JSID32X450 is a genuine double acting, double rod JIS-standard air cylinder with a Ø32mm bore and 450mm stroke, G1/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ32 mm
- Stroke450 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod
- Rod threadM10×1.25
- CushionAdjustable, 20 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID32X450
Delivering 345 N of thrust in both directions at 0.5 MPa, this 32 mm bore double-rod actuator uses a single piston with a rod exiting each cover to ensure perfectly symmetric load paths. The G1/8 port feeds the chamber, and because the pressure area is identical on both faces, push and pull forces remain equal. This makes it ideal for anti-rotation tasks or driving twin tooling stations simultaneously.
Built to JIS standards with an extruded hard-anodized aluminum profile barrel, the unit is noticeably shorter than an ISO 15552 cylinder of the same bore. It handles a safe working load of about 207 N, which translates to lifting roughly 18 kg vertically with a 2:1 safety margin. Note that this specific SKU lacks a magnet and cannot accept CMSE or DMSE sensors; you would need the -S variant for position detection.
Airtac JSID Double Rod Cylinder JSID32X450 Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID32X450 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 450 mm |
| Acting type | Double acting, double rod |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID32X450
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 32 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID32X450 Is Used
Twin Tool Synchronization
Drives two opposing pickers simultaneously from one piston, keeping cycle times perfectly matched without adding a second cylinder.
Anti-Rotation Work Handling
The dual-rod architecture prevents twist during vertical clamp movements, ensuring the jaw stays true on precision machining lines.
Symmetric Transfer Pusher
Pushes a part forward while the rear rod retracts a return cam, balancing the load path across the 450 mm stroke.
Is the Airtac JSID Double Rod Cylinder JSID32X450 the Right Cylinder?
When sizing this actuator, the 32 mm bore provides 345 N both ways at 0.5 MPa. If you need less force, there is no smaller JSID option, making this the low edge of the range. Stepping up to the 40 mm bore yields 528 N both ways if your application demands more push. A double-rod design is the right call when you need anti-twist guidance, a symmetric load path, or a rear rod to act as a sensor cam. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2. Because this model has a 450 mm stroke, you must account for side loads and use external guides to prevent rod bending over that length. Also, remember this non-magnetic SKU cannot host a sensor.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID32X450 FAQ
Because it is a double-rod cylinder, force is equal in both directions using the rod-side area. It outputs 345 N at 0.5 MPa and 483 N at 0.7 MPa, with a theoretical maximum of 70 kgf at 1.0 MPa. It features a 12 mm rod, a G1/8 port, and a 20 mm adjustable air cushion at each end.
No, a plain double-rod cylinder will drift if air is lost or the valve is centered, as the air cushion only decelerates the piston near the stroke end. For vertical load holding, you must use an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID32X450
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.