Airtac JSID Double Rod Cylinder JSID32X50
The AirTAC Airtac JSID Double Rod Cylinder JSID32X50 is a genuine double acting, double rod JIS-standard air cylinder with a Ø32mm bore and 50mm stroke, G1/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ32 mm
- Stroke50 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod
- Rod threadM10×1.25
- CushionAdjustable, 20 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID32X50
Delivering 345 N of equal force in both directions at 0.5 MPa, this 32 mm bore double-rod JIS profile cylinder uses a G1/8 port and a 12 mm rod. The symmetric layout means the piston pushes and pulls with identical power, making it ideal for non-rotating anti-twist guidance or driving twin tooling from both ends. Its extruded hard-anodized aluminum profile barrel is shorter and more compact than a same-bore ISO 15552 cylinder.
With a 50 mm stroke, the unit safely handles about 207 N of real work, which translates to lifting roughly 18 kg vertically with a 2:1 margin. This SKU lacks a magnet and cannot take a sensor; add the -S variant for CMSE/DMSE switches. Note that a plain cylinder drifts on air loss, as the adjustable 20 mm cushions only decelerate the piston, so use an external rod lock for held loads.
Airtac JSID Double Rod Cylinder JSID32X50 Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID32X50 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting, double rod |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID32X50
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 32 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID32X50 Is Used
Twin Tool Transfer
Drives two opposing pickers simultaneously with equal 345 N force, ensuring perfectly synchronized part handoff between conveyor stations.
Anti-Rotation Stamping
Uses the dual-rod symmetric load path to press small components without piston twist, keeping precision dies aligned during the 50 mm cycle.
Symmetric Clamping
Clamps a workpiece from both ends at once, using the equal push and pull power to hold delicate electronics firmly for processing.
Is the Airtac JSID Double Rod Cylinder JSID32X50 the Right Cylinder?
Size both ways by comparing equal-both-ways force at 0.5 MPa: this 32 mm bore gives 345 N, while stepping up to the 40 mm bore yields 528 N, and there is no smaller JSID option below 32. Choose a double rod when your mechanism needs anti-rotation stability, a symmetric load path, or back-end sensing. Mounting options include FA, LB, TC, TCM1, and TCM2. Because this 50 mm stroke is short, side-load guiding is minimal, but any stroke over 300 mm requires external load guides to prevent binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID32X50 FAQ
Force is equal both ways: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a theoretical max of 70 kgf at 1.0 MPa. The air port is G1/8, the rod is 12 mm, and it has M10x1.25 rod threads.
No, this specific SKU lacks a magnet and cannot take a switch. You must order the -S variant to use CMSE or DMSE sensors for end-of-stroke detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID32X50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.